Multi-Function Auto 19V 12000mAh Car Jump Starter with LED Light, Car Jump Starter, Jump Starter

User Manual

Thank you for choosing the jump starter! Always follow the basic safety precautions when using electrical appliances. Read the instruction carefully; please keep this instruction for reference.

Operation guidance
Indication light
Press the switch button to check the capacity of Jump starter

Indication light
Un-charge
5flashing
1 solid
2 solid
3 solid
4 solid
5 solid
Battery capacity
0%
10%
20%
40%
60%
80%
100%

The indication light will flash one by one during charging process; the number of solid indication light indicates the battery of Jump Starter. Full LED are solid when charging is full or complete

Charging for Jump Starter itself
1.      Plug the DC connector of home adaptor into the input 12V1A socket of product
2.      Plug into AC socket (110~230Vac) to start charging the building battery
3.      2~4 Hrs the product will be full charged
4.      While we apply the car adaptor to charge the product, please plug the DC connector of car adaptor into the input 12V1A socket of product.
5.      Plug another connector into the socket of cigarette lighter to get charging


For Jump starter of 12V Vehicle
1.      Make sure the Solid LED is at least light 3 or above
2.      Connect the Red clamp of Jump cable to the positive of Vehicle battery (+) and the Black clamp to the negative of Vehicle battery (-).
3.      Plug the connector of Jump cable into the Jump starter socket
4.      Start the Vehicle
5.      Once the Vehicle start, please remove the connector from the Jump starter socket then disconnect the Red and Black clamp of Jump cable within 30Sec
6.      Close the cover of battery and the cover of front cover


For Charging or supply power for notebook
1.      Select the suitable connector which meet you notebook requirement and plug into your computer DC power socket.
2.      Plug another connector to 19V3.5A output port of Jump Starter.
3.      Press the switch button to charge or supply power to Notebook.
4.      Make sure the battery of Jump Starter 5 Solid LED lights.

For Charging or supply power for Tablet or mobile phone
1.      Select the suitable connector which meet you mobile phone or tablet requirement and plug in.
2.      Plug another connector to 5V1A output USB port of Jump Starter.
3.      Press the switch button to charge or supply power to Notebook.
4.      Make sure the battery of Jump Starter 3 Solid LED lights.

For Charging or supply power for 12V Vehicle or other 12V electronics products
1.      Select the suitable connector which meet you 12V electronics products requirement and plug in.
5.      Plug another connector to 12V2A output port of Jump Starter.
6.      Press the switch button to charge or supply power to 12V electronics products.
7.      Make sure the battery of Jump Starter 5 Solid LED lights.

LED Illumination
Press the switch button 3 Seconds to start the LED illumination, there are 4 kinds of different mode will be shown while you lightly press the button (Normal, Strobe, SOS, off)

Technical Specification
Size:                 160mm*75mm*30mm
Input:                12.6V1A
Output:               5V1A or 5V2A; 12V2A; 19V3.5A; 12V Vehicle Jump starter
Capacity:             12000 mAH
Starting current:       180A
Inrush current:         300A
Weight:               430g
Operation temperature:   0~60ºC, when the temperature lower than 0ºC, the battery capacity will reduce due to the capacitance affected by the environment temperature, when the temperature lower than -10ºC, the battery capacity in the worst situation, the restart process is unstable.