About the Power Steer Pump Pulley Kit
You can now effortlessly remove your vehicle's pulley to install on the power steering pump or even the alternator thanks to the Automotive Power Steering Pump Pulley Remover Installer Tool Kit.
FITS YOUR VEHICLE
This disconnect tool set releases and installs the power steering line from the pump on most American domestic vehicles such as 1989 to current GM pickups 1T, 1/2T, and 3/4T.
FITS YOUR PULLEY HUBS
and fits pulley hubs with diameters of 1-1/8-inch, 1-1/4-inch, 1-5/16-inch, and 1-3/8-inch. It is for use on Thompson and Ford C111, C2 power steering pumps found on Ford, GM, and Chrysler vehicles.
EASY TO USE
We recommend using lubrication on the tools before use. Place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, then place the grabber nut center piece with a die on top, tightly screw the threaded stud onto the center of the end of your puller nut, and then use a ratchet, crescent wrench, or air gun with socket to loosen and remove.
Package Contents:
Disconnect tool
Bushing
Screw set
Carrying case
Send Message
