Model NO.
IT-L10
Coating
Powder Coating
Airflow Direction
Fully Undershot-type
Heating Mode
Diesel
Paint Mist Treatment
Dry-type
Condition
New
Plenum (Height)
600mm
Extraction
350mm
Extraction Area
40m2
Grids Carrying Capacity
900kg/Wheel
Walls
50mm Rock Wool Walls
Brightness
>1,500lux
Air Volume
35,000m3/H
Empty Loaded Air Speed
0.24m/S
Heats
315kw Heat Exchanger
Maximum Working Temperature
80 Celsius
Controls
CE Standard
Voltage
380V, 50Hz, 3pH
Rated Power
28kw
Noise
<78 dB
Transport Package
Cargo Loaded on Steel Frame Handled by Forklifts
Specification
10000 x 4000 x 3000mm (L x W x H)
Trademark
INFITECH
Origin
Guangzhou, China
HS Code
8419899090
Production Capacity
1000 Sets/Year
After-sales Service:
24 Hours After Service
Warranty:
2 Years
Type:
Spray Booth
Certification:
CCC, CE
Substrate:
Steel
Brand:
Infitech
Downdraft Spray Paint Cabin Paint Spray Booth for Cars Painting
1.FEATURES
2.SPECIFICATIONS
3.DETAILS
AIRFLOW & BOOTH STRUCTURE
IT-SUPER-L10 spray booth is standard with downdraft airflow. Downdraft airflow is ideal for auto refinishing thanks to the balanced and consistent airflow.
The Infitech spray booth IT-SUPER-L10 comes with diffuser device inside the 600mm high plenum for reducing air speed and balancing air distribution across the plenum to achieve the purpose that air flows to the workspace evenly. In the basement, the air is drafted at quite different speeds subject to the position of the air handling unit. To solve this problem, we equip the basement with downdraft balancing vanes. The vanes are with flaps that allow the user to adjust and readjust to make the air at different points of the basement flow evenly.
Standard grids carrying capacity: 900kg/wheel. To cater to different needs, Infitech can provide grids with bigger carrying capacity. Please contact one of our experts for more details.
OPTION
Various types of basement are available and can fit with spray booth IT-SUPER-L10.
DOOR & LIGHTS
OPTION
AIR HANDLING UNIT
OPTION
CONTROL
UPGRADE
FILTERS
AIR ACCELERATOR UNIT (OPTION)
To satisfy the needs of using water-based paints, the spray booth IT-SUPER-L10 can be upgraded with air accelerator unit.
The air accelerator system improves flash cure times by evenly increasing air velocity within the spray booth providing an extra boost to air movement.
It helps speed up the drying phase, optimize the finishing, and reduce the cost.
Factory image:
Packing and loading:
FAQ
Infitech not only manufactures spray booths, but also specializes in design and layout of refinishing plants. Take to one of our experts to proceed with your spray booth project.
- Internal dimensions: 10000x4000x3000mm
- Well balanced downdraft airflow
- Rigid booth structure
- Shadowless lighting system
- High performance air makeup unit and heat unit
- Energy-efficient inverter control
- Heavy duty controls
- Easy maintenance
2.SPECIFICATIONS
| ITEMS | Downdraft Spray Paint Cabin Paint Spray Booth for Cars Painting SPECIFICATIONS |
| Model | IT-SUPER-L10 spray booth |
| Application | For vehicles painting and baking |
| Design standard | BS EN 13355: 2004+A1:2009 BS EN 60204: 2006+A1:2009 |
| Internal dimensions | 10000 X 4000 X 3000mm (L X W X H) |
| External dimensions | 10110 X 5760 X 4010mm (L X W X H) |
| Airflow | Full Downdraft |
| Plenum (height) | 600mm |
| Extraction | Through 350mm high raised basement |
| Extraction area | 40m2 |
| Grids carrying capacity | 900kg/wheel |
| Entrance door | 3400x2900mm (WxH), 1 set |
| Service door | 800x2000mm(WxH), 2 sets |
| Walls | 50mm rock wool walls |
| Ceiling lights (LED) | 14 sets, each 6 X 18W, 1,512W total |
| Sidewall lights (LED) | 12 sets, each 2 X 18W, 432W total |
| Brightness | >1,500LUX |
| Filters | Bag filter, high efficiency ceiling filter, floor filter, exhaust filter |
| Intake/Exhaust unit | Direct-type turbine fan, 2x11KW, SIEMENS motor |
| Air volume | 35,000m3/h |
| Empty loaded air speed | 0.24m/s |
| Heats | 315kw heat exchanger, RIELLO gas burner RS5D |
| Maximum working temperature | 80ºC |
| Controls | CE standard control box |
| Inverter | With inverter |
| Voltage | 380V, 50Hz, 3ph |
| Rated power | 28KW |
3.DETAILS
AIRFLOW & BOOTH STRUCTURE
IT-SUPER-L10 spray booth is standard with downdraft airflow. Downdraft airflow is ideal for auto refinishing thanks to the balanced and consistent airflow.
The Infitech spray booth IT-SUPER-L10 comes with diffuser device inside the 600mm high plenum for reducing air speed and balancing air distribution across the plenum to achieve the purpose that air flows to the workspace evenly. In the basement, the air is drafted at quite different speeds subject to the position of the air handling unit. To solve this problem, we equip the basement with downdraft balancing vanes. The vanes are with flaps that allow the user to adjust and readjust to make the air at different points of the basement flow evenly.
Standard grids carrying capacity: 900kg/wheel. To cater to different needs, Infitech can provide grids with bigger carrying capacity. Please contact one of our experts for more details.
OPTION
Various types of basement are available and can fit with spray booth IT-SUPER-L10.
- Metal basement in the ground
- Pit with total grating
- Pit with partial grating (2 rows of grating)
- Raised metal basement with pneumatic ramp inside the spray booth
- Raised metal basement with fixed ramp inside the spray booth
- 4-leaf front entrance door: 3400x2900mm, with panic bar, observation window size: 500x1995mm
- Personnel service door: 800x2000mm
- Superior angled ceiling lights and vertical sidewall lights
OPTION
- Entry doors at both ends for drive-through purpose
- Electric roller shutter door
- Explosion proof lighting fixtures
AIR HANDLING UNIT
- Direct drive centrifugal fan (non-spark fan design) & SIEMENS motor
- Cylinder-drive paint and bake conversion damper, with limit switch for confirming damper position for paint and bake phase
- 315KW heat exchanger efficiency is over 93%, less heating time and energy saving, RIELLO gas burner RS5D (two stage)
OPTION
- Explosion-proof SIEMENS motor
- High performance low noise fans (Italian brand)
- Diesel burner
- Direct gas fired heating system with Eclipse burner
- Direct gas fired heating system with JATE burner
- Electric heating
CONTROL
- Basic functions: spraying, heating spraying, flash, baking, cooling
- Safety functions: emergency stop, over-heat alarm, failure alarm, fans interlock with heating system
- With inverter saves more than 30% energy
- With stack light indicating the working status inside the booth
- Main electrical components: famous brand
UPGRADE
- Digital screen control panel
| Item | Specification |
| Pre-filter | Bag filter |
| Ceiling filter | High efficiency F5 grade filter |
| Floor filter | Fiberglass paint arrestor filter |
| Extract filter | Activated carbon filter |
AIR ACCELERATOR UNIT (OPTION)
To satisfy the needs of using water-based paints, the spray booth IT-SUPER-L10 can be upgraded with air accelerator unit.
The air accelerator system improves flash cure times by evenly increasing air velocity within the spray booth providing an extra boost to air movement.
It helps speed up the drying phase, optimize the finishing, and reduce the cost.
Factory image:
Packing and loading:
FAQ
Q: Can you integrate hanging device with rail to the spray booth?
A: Yes. But please advise the required carrying capacity of the hanging device for our reference. If there is any other requirement, please also let us know.Q: How many pieces of IT-SUPER-L10 spray booths can be loaded in a container?
A: For IT-SUPER-L10 spray booth with raised basement, it requires 1 big container (1x40GP) for loading.Q: Is your paint spray booth CE certified?
A: Yes.Q: The space in the workshop is limited. Can you design the spray booth according to my workshop layout?
A: Yes. Please supply your workshop layout, Infitech experienced technician will cater the spray booth design according to your workshop and propose the optimal solution to you.Infitech not only manufactures spray booths, but also specializes in design and layout of refinishing plants. Take to one of our experts to proceed with your spray booth project.
Q: Can you put the generator unit at the top of the spray booth?
A: It is okay. We will add overhead steel platform to support the generator at the top of the spray booth. But please send the internal height of the building for us to check if the building is high enough or not.Q: What is the warranty?
A: 2-year warranty.Q: Can I put my logo on the spray booth?
A: Yes, certainly.Q: What if I find there are missing parts after I receive the shipment?
A: If the parts are missing due to Infitech's mistake, Infitech will send new parts to you to complete the assembly. Alternatively, if the parts can be purchased locally, you can get them locally. Infitech will pay back the cost of the missing parts to you after receiving the bill supplied by you.Send Message
