Model NO.
D63S-2465-180-P404E-AV0.8/1.0
Frequency Range
Low Frequency
Electric Current
DC
Wire Feeder Type
MIG Wire Feeder
Current
Direct Current
Motor Type
D63s/D63L
Motor Voltage
DC24V
Motor Output Power
65W
No-Load Speed
180rpm
No-Load Current
1.5A
Stall Torque
20n.M
Stall Current
18A
Wire Feeder Fram Type
P404D/P404e
Wire Feeder Roll Size
30*22mm
Apply for Wire Roll Weight
15kg,5kg
Feed Wire Diameter
0.6mm 0.8mm 0.9mm1.0mm 1.2mm
Max Feed Speed
16m/Min
Mini Steady Operation Voltage in Load
DC4.5V
Transport Package
carton
Specification
63mm
Trademark
WEWIN
Origin
China
HS Code
8501310000
Production Capacity
60000/Month
Cooling Way:
Water Cooling
Shielding Gas:
Argon Gas
Control:
Automatic
Automatic Welding Wire Feeder (D63S-2465-180-P404E-AV0.8/1.0)
This wire feeder can be used for the welding machine which the welding current is less than 350A,the welding machine can work at spot weld and continue weld.
Wire Feeder Specialty
1) This wire feeder use our own designed motor which is special for welding machine with a gear ratio is 20/1, it works at low noise and high torque.
2) The standard motor for this kinds wire feeder is 65watt, 180rpm, also you can use the 65W 220rpm motor.
3) The roll only use the 30mm*22mm rolls
4) This wire feeder is our new design for inventer welding machine.
5) Motor can be fixed encoder and hall sensor and opto-switch.
Motor Technical Paramenters
This wire feeder can be used for the welding machine which the welding current is less than 350A,the welding machine can work at spot weld and continue weld.
Wire Feeder Specialty
1) This wire feeder use our own designed motor which is special for welding machine with a gear ratio is 20/1, it works at low noise and high torque.
2) The standard motor for this kinds wire feeder is 65watt, 180rpm, also you can use the 65W 220rpm motor.
3) The roll only use the 30mm*22mm rolls
4) This wire feeder is our new design for inventer welding machine.
5) Motor can be fixed encoder and hall sensor and opto-switch.
Motor Technical Paramenters
Motor type: | D63S |
Motor voltage: | DC24V |
Motor output power: | 65W |
| No-load speed: | 180rpm |
No-load current: | 1.5A |
| Stall torque: | 20N.m |
Stall current: | 18A |
Wire feeder frame type: | P404E |
Wire feeder roll size: | 30mm*22mm |
| Maximum feed speed: | 16M/min |
Send Message
