Model NO.
FN-100KVA, FN-150KVA, FN-200KVA
Current
Alternating Current
Color
Blue and Yellow
Warranty
One Year
Transport Package
Angle Iron Frame and Human Made Wooden Sheet Box
Specification
CCC, ISO, UL, CE
Trademark
DuroWelder
Origin
Guangzhou City, China
HS Code
8515219000
Production Capacity
100sets Per Year
Cooling Way:
Water Cooling
Control:
Semi-Automatic
Style:
Vertical
Frequency Range:
Low Frequency
Electric Current:
AC
Type:
Seam Welders
1. General Description
This Equipment is specially designed for welding the stainless steel sink bowl and sink board together. When it work, the workpiece turn around by the even speed, the worker hold and support it manually.
Adopted the Silver Bearing to make sure the best electric quality and save the energy.
2. Machine Working Process and Step
Load the Sink Workpiece to the Fixing Jig of Working Table --- Start the Machine --- The Welding Electrode Rollers and Sink Workpiece Start to Go Round and Round, at the same time the Workder Hold and Support it manually --- Welding Until Finish --- Automatic Back to the Original Position --- Unload the Workpiece.
3. Main Parts List of the Machine
3.1 Air Cylinder and Pressure System;
3.2 Long Seam Welding Arm;
3.3 Motor Power System;
3.4 Seam Welding Electrode Up and Down Rollers;
3.5 Special Design Fixing Jig and Table;
3.6 Main Body of Machine;
3.7 Electric Controlling Box;
3.8 Seam Welding Transformer;
4. Main Technical Parameter of Standard Model Machine
4.1 Machine Dimension: L: 1700mm× W: 900mm× H: 1900mm(Or designed specially basing on the sink workpiece);
4.2 Welding Length and Width of sink: 1300mm× 600mm(Or designed specially basing on the sink workpiece);
4.3 Total Power: 100KW, 150KW, 200KW;
Main Technical Parameter
This Equipment is specially designed for welding the stainless steel sink bowl and sink board together. When it work, the workpiece turn around by the even speed, the worker hold and support it manually.
Adopted the Silver Bearing to make sure the best electric quality and save the energy.
2. Machine Working Process and Step
Load the Sink Workpiece to the Fixing Jig of Working Table --- Start the Machine --- The Welding Electrode Rollers and Sink Workpiece Start to Go Round and Round, at the same time the Workder Hold and Support it manually --- Welding Until Finish --- Automatic Back to the Original Position --- Unload the Workpiece.
3. Main Parts List of the Machine
3.1 Air Cylinder and Pressure System;
3.2 Long Seam Welding Arm;
3.3 Motor Power System;
3.4 Seam Welding Electrode Up and Down Rollers;
3.5 Special Design Fixing Jig and Table;
3.6 Main Body of Machine;
3.7 Electric Controlling Box;
3.8 Seam Welding Transformer;
4. Main Technical Parameter of Standard Model Machine
4.1 Machine Dimension: L: 1700mm× W: 900mm× H: 1900mm(Or designed specially basing on the sink workpiece);
4.2 Welding Length and Width of sink: 1300mm× 600mm(Or designed specially basing on the sink workpiece);
4.3 Total Power: 100KW, 150KW, 200KW;
Main Technical Parameter
| Item Model | Rated Capacity | Rated Primary Voltage | Rated Frequency | Maximum Short Current | Electrode Stroke | Welding Speed | Electrode Pressure | Motor Power Source | Motor Power | Cooling Water Flow | Weight |
| KVA | V | Hz | A | mm | M/min | KN | V | W | L/min | Kg | |
| FN-50 | 50 | 380 | 50/60 | 16000 | 50 | 0.6-4 | 2.5 | 3-380V | 90 | 30 | 500 |
| FN-75 | 75 | 380 | 50/60 | 19000 | 50 | 0.6-4 | 3.9 | 3-380V | 150 | 30 | 650 |
| FN-100 | 100 | 380 | 50/60 | 22000 | 50 | 0.6-4 | 4.7 | 3-380V | 150 | 30 | 880 |
| FN-150 | 150 | 380 | 50/60 | 29000 | 50 | 0.6-4 | 6.1 | 3-380V | 150 | 30 | 1050 |
| FN-200 | 200 | 380 | 50/60 | 35000 | 50 | 0.6-4 | 6.1 | 3-380V | 150 | 30 | 1250 |
Send Message
