Description of Concrete Floor edging Grinder machine:
Concrete and stone floor grinder is a high-performance and reliable grinding and polishing machine. Perfect not only for polishing large surfaces of marble, terrazzo, granite, and concrete but also for the preparation of industrial floors, bush hammering, grinding, the removal of old glues and resins, and concrete polishing with a Super concrete system. Compact and easy to use also in narrow spaces. Thanks to the mono-rotating planetary with steel gears productivity increases by 2-3 times compared with a standard belt-driven grinder.
Concrete floor grinders use a horizontal rotating disc to perform a multitude of tasks; commonly fitted with diamonds or other hard abrasives they can be used to level, smooth, and clean the surface.
Ranging in size from single-disc units for working in small or restricted areas, to dual and triple-disc machines for high-production grinding of large slabs.
All machines are equipped with vacuum ports for dust-free dry grinding and include a water attachment for wet grinding.
Application of concrete and stone floor grinder:
For grinding concrete floors, terrazzo and other stone floors
Parameters for floor grinder:
Features:
1. when doing some edge grinding, shroud sections can be taken off
2. 180T and 280 can turn its head right up to the wall, grinding the side of the wall
3. Foldable handle for easy transportation
Description:
1 low-speed high-torque hydraulic motor drive rotary device output torque required for drilling operations.
2 with the cylinder to promote, so that more stable propulsion and failure rate than the motor propulsion significantly reduced.
3 two-stage filter devices to effectively ensure the safety of diesel engines to extend their life of diesel engines.
4 can monitor the hydraulic system pressure and push the pressure at any time to ensure that the rig is stable and efficient operation.
Thoughtful service to win the trust of customers.
description:
Hydraulic DTH Drill is a high-grade rig with a stent-type down-hole drilling rig with excellent performance and powerful features. Hydraulic downhole drilling rig, walking downhole drilling rig, open pit drill.
products use:
a pneumatic crawler drill is mainly used for open-pit mine mining, hydropower engineering, road construction, and other stone works crawler drilling machine operations.
product parameters:
| Models | ZT100A |
| Adapt to rock hardness | F=6~20 |
| Drilling diameter | 80~130mm |
| Drilling vertical hole depth | 30m |
| monitor rate | 20kw |
| Walking speed | 2.0km/h |
| Single climbing ability | 30° |
| Maximum lifting force | 15KN |
| One push trip | 3000mm |
| Working pressure | 0.5-1.4Mpa |
| Gas consumption | 7-12m³/min |
| Rotational speed | 0-70r/min |
| Specifications of drill pipe | Φ60×2000mm |
| Total Weight | 3.5T |
Note:
1, ready-to-rock caverns, the cavern specifications can be determined according to the method of hydraulic crawler drill machine holes, the general level of the hole when the hole is cut 2.6-2.8 m height, chisel on the hole, down to the hole or the hole when the hole width Is 2.5 meters, height of 2.8-3 meters.
2, the gas and water pipelines, lighting lines, and other leaders to stand near the working face.
3, according to the design requirements for the hole, the pillars were erected firmly. The upper and lower ends of the pillars to mat board, the horizontal axis, and the ring by a certain height and direction of the pillars installed on the use of a hand winch machine lift, according to the desired angle fixed to the pillar, and then adjust the hydraulic dth drill rig hole too.
FAQ:
Q1: Are you a factory or trade company?
A1: We are a factory. And we have ourselves trading company.
Q2: What is the exact address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One-year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can be customized according to your equipment.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will it take to arrange production?
A7: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with a professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.
Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Our Company Information:
We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience in mining equipment, main products include:
Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine
About Our Factory:
About the products:
Packing and Shipping:
Purchase Process:
About the Quality:
Others:
Why you choose us:
1. We are a real factory offering products and providing free technical advice.
2. Company in business for many years and served Over 50 countries' customers.
3. All machines with CE, ISO, and SGS certificates. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.
Send Message
