Mobile automatica cleaning fume extraction for TIG/MIG/MAG/GAS SHIELDED ARC welding
Features
1. The air purifier applies to all kinds of fume extractor caused by welding, grinding, as well as recycling of
rare metals, precious materials, etc
2. For the potential of fire and molten slag particles, three protective measures are used inside fume extractor ,
to make it a longer life, more secure and reliable. They are suction hood mesh, top cover stainless steel
sintering mesh and metal plate front filter cartridge.
3. KSZ series uses PLC automatic control makes operation easy. The filter reverse blowing pipe rotates inside
filter cartridge by compressed air, it comes ture automatic cleaning in all directions, so that there is a more
thorough cleaning filter surface.
4. This machine has three ways of cleaning, they are stop auto cleaning, press F3 keyword autocleaning and
pressure difference auto cleaning under not stop status.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-
resistant compounded materials, without crack and damage for sparks but longer life.
6. This model is suitable for middle to large level welding fume. For example, Co2 Gas shield welding.
Parameters
Model | KSZ-3.0D | KSZ-3.0D1 | KSZ-3.0D2 |
air flow | 2600 (m3/h) | 2800 (m3/h) | 2800 (m3/h) |
Motor Power | 3.0 (kw) | 3.0 (kw) | 3.0 (kw) |
Voltage | 380 V/50 Hz | 380 V/50 Hz | 380 V/50 Hz |
Filtering area | 20 (m2) | 20 (m2) | 20 (m2) |
Surface Cleaning Methods | Automatic Cleaning | Automatic Cleaning | Automatic Cleaning |
Compressed Air | 0.5~0.6 (MPa) | 0.5~0.6 (MPa) | 0.5~0.6 (MPa) |
Filtration Efficiency | >99.9% | >99.9% | >99.9% |
Quantity of suction arm | 2 sets (φ160 3m) | 1 set (φ200 3m) | 1 set (φ250 3m) |
Noise | ≤74±5dB(A) | ≤74 dB(A) | ≤74 dB(A) |
Demission | 700×800×1600 (mm) | 700×800×1600 (mm) | 800×800×1633 (mm) |
Weight | 266±10 (kg) | 266±10 (kg) | 266±10 (kg) |
Send Message
