Hot Selling 18mm Universal Reverse Buzzer Sensor Parking System
Technical Features:
1)Power voltage: 12V/ 24V DC
2)Operating current: 60mA~ 150mA
3)Frequency of sensor: 40KHz
4)Operating temperature: - 30°~ 80°
6)5)Detection range: 2. 4M ( to large flat objects or wall)
7)Optimum detection range: 1M( adult)
8)Response time: 0.15 sec.
9)Buzzer volume: > 85dB(internal) , > 95dB(external).
Specifications
1) Car Front Or Rear 4 Parking Sensor System , fit for all passenger cars;
2) Free change from Front Sensor System to Rear Sensor System
3) Side sensor distance limited can be changed freely to adjut detection wide
4) Offset 25cm for spare tyre and tow bar;
5) Smart detection for people about 1 meter to enhance the ability to capture target
6) Fast response time from 0.12s to 0.2s;
7)Sensor detection range: 0cm~2.4m;
8)Buzzer range: 30cm~1.5m for rear, 30cm-80cm for front;
9) Advanced self-diagnosis with error indication;
10) Working weather:-30ºC to +80ºC;
11) 4*T0 single angle sensor, 18.5mm plastic flat, 2.5m cable with waterproof connector;
12) Precision accuracy: CM;
13) BUZ01, "Hi-Low-Off" buzzer sound alarm adjustable;
14) Power Input: 12~24V DC. Built-in resettable PTCs to protect the circuit.
Addtional Switch to turn on/off the whole parking sensor. Built-in buzzer alarm option for chioce. And there is no standalone buzzer in the kit for choice. Welcome to contact for more details.
Specifications
1) Car Front & Rear 4 Parking Sensor System , fit for all passenger cars;
3) Sensor diameter:18.5mm.
4) Sensor cable:2.5m with IP67 waterproof connector.
5) Sensor detection:0-2.5m.
6) Display range:0-2.5m.
7) Built-in buzzer range:30cm-1.5m.
8) Sensor sensitivity is adjustable. You can adjust sensor sensitivity by yourself if it's too strong or too weak.
Easy and Free Function Choice for different customers from front bumper to rear bumper.
There are brake activiation and speed activation availble. You can adjust CONFIG1 switch to choose front system or off to as rear system. CONFIG 2 on to choose speed activation and off to choose brake activation for front system. 
10) CONFIG3 OFF to make side sensor detection limited to 80cm to avoid side sensor strong detection. System will not make bip alarm or show distance more than 80cm. It can avoid the annoying bip sound. 
11) CONFIG4 to offer buzzer sound volume choice from 800Kz to 1200Kz. Then you can choose the better buzzer sound you need for louder
volume and normal volume. 
12) Buzzer working distance is from 0-80cm for front system and 0-1.5m for rear system. And your LED display will show to relative light color (red-yellow-green) accordingly.
13) Pls install the sensors not less than 45cm to avoid detecting ground. And turn a certain angle forside sensors.
Part list
| Control Box | 1 |
| Sensors | 4 |
| Sensor Cable(2.5m) | 4 |
| Displayer/Buzzer | 1 |
| Displayer/ Buzzer Cable | 1 |
| Power Cable | 1 |
| Hole driller | 1 |
| Tape or Velcro (accessory bag) | 1 |
| Installation Manual | 1 |
Package and Shipping.
Neutral Package:
QTY: 24 SETS .
N.W.:10.0 KGS .
G.W.: 12.8 KGS .
Volume:0.040m³
Send Message
