Model NO.
CM-315
Chip
CMOS
Waterproof Grade
IP68
Image Sensor Available
PC7080/PC1058/PC7440
Camera Degree
170 Degree
Waterproof
Yes
TV System
PAL/NTSC
Minimum Illumination
0.1lux
Pixels
628X582
Resolution
480/600/700tvl Optional
Transport Package
Neutral Retail Box, Then Into Carton
Specification
480TV lines CMOS in default
Trademark
CE
Origin
China, Shenzhen
HS Code
8525801390
Production Capacity
30000PCS/Month
Applicable Model:
Car, SUV
Shell Material:
ABS Plastic
Display Type:
Reverse Image
Interface:
RCA
Function:
Night Vision, Waterproof, Shockproof
Definition:
480TV Lines
Auto Backup Camera 8IR Night Vision US license Plate Frame
Features
1. Car reversing camera with US license plate holder: IP67 standard waterproof, shockproof. Do not worry about the fog or the water inside, it does the job well in any weather.
2. Wide viewing angle: viewing angle of 170 degrees reversing camera, which can be adjusted 45 degree by the screw loose. It allows you to keep your security at all times.
3. 8 red LED for night vision, high quality NTSC system, with distance lines and excellent performance of 0lux. By the way, it's quite a long time that a 6m video cable to connect this backup camera to your own monitor.
4. It is perfectly suited to your license plate, and most importantly, easy to replace your old license plate holder. The best choice for your car!
Description:
* Sensor: PC7430H 1/4 inch
* Resolution: 720 * 480
* Dynamic range:> 60db
* Minimum illumination: 0.1Lux
* Angle of view: 170 degrees
* Water resistant: IP68
* Video output: 1.0vpp, 75ohm
* Distance lines: yes
* Operating temperature: -20 ºC ~ 70 ºC, Rh95%
* Waterproof index: IP67 * Pixels: 500,000
* Sharpness: 480TV line
* Lens angle:> Horizontal 100 °
* Signal to noise ratio:> 45DB
* Power: 12v (± 5%) / 120mA
* Night fill light: with infrared fill light
* Storage temperature: -40 ºC ~ 90 ºC, Rh95%
* Voltage: 9 ~ 36v
Package Included:
1 * License Plate Frame with Backup Camera
1 * Video cable (6m)
1 * Power cable
1 * Installation instructions
Note:
1. You connect this reversing camera to the reversing light, so when your car is in reverse, it will turn on automatically.
2. Do not open the camera. It will not be waterproof if opened.
3. The red port is connected to 12V DC.
4. The yellow port is used for video output.
Features
1. Car reversing camera with US license plate holder: IP67 standard waterproof, shockproof. Do not worry about the fog or the water inside, it does the job well in any weather.
2. Wide viewing angle: viewing angle of 170 degrees reversing camera, which can be adjusted 45 degree by the screw loose. It allows you to keep your security at all times.
3. 8 red LED for night vision, high quality NTSC system, with distance lines and excellent performance of 0lux. By the way, it's quite a long time that a 6m video cable to connect this backup camera to your own monitor.
4. It is perfectly suited to your license plate, and most importantly, easy to replace your old license plate holder. The best choice for your car!
Description:
* Sensor: PC7430H 1/4 inch
* Resolution: 720 * 480
* Dynamic range:> 60db
* Minimum illumination: 0.1Lux
* Angle of view: 170 degrees
* Water resistant: IP68
* Video output: 1.0vpp, 75ohm
* Distance lines: yes
* Operating temperature: -20 ºC ~ 70 ºC, Rh95%
* Waterproof index: IP67 * Pixels: 500,000
* Sharpness: 480TV line
* Lens angle:> Horizontal 100 °
* Signal to noise ratio:> 45DB
* Power: 12v (± 5%) / 120mA
* Night fill light: with infrared fill light
* Storage temperature: -40 ºC ~ 90 ºC, Rh95%
* Voltage: 9 ~ 36v
Package Included:
1 * License Plate Frame with Backup Camera
1 * Video cable (6m)
1 * Power cable
1 * Installation instructions
Note:
1. You connect this reversing camera to the reversing light, so when your car is in reverse, it will turn on automatically.
2. Do not open the camera. It will not be waterproof if opened.
3. The red port is connected to 12V DC.
4. The yellow port is used for video output.
Send Message
