Hot Dipped Galvanized Stronger Mesh ATV Utility Trailer, ATV Timber Trailer, ATV Camper Trailer

Best Seller High Quality Hot Dipped Galvanized Stronger Mesh ATV Utility Trailer

1) inner size :2400x1500x300mm ATV trailer

2)GVW:750KG

3)Tire :ST205/75R14/DOT certificate

4)DOT/EMARK certificate

5)spring :50mm width 7mm thickness

6)chassis steel :square steel tube 50x70mm

7)material :Q235

8)Ramp height :1250mm

9)Floor :mesh

10)Finishing :power coated or hot dip galvanized

11)used to carry ATV ,motorcycles and other items

QTY/20FCL:20PCS

QTY/40FCL:55PCS

Trailer assembly type: Bolt on

Part A  Lay the chassis upside down

step 1: springs mounted  into spring hangers with M14x85

step 2: axle overhang the springs and connected by U bolts and fish plate

step 3: Hub-wheel: take off lugnuts from hubs, wheel rim go through the hub bolt and ended by lugnuts.

step 4: Drawbar fitted to the chassis by bolts according to the manual

Part B

Step5: Takes the assembly upside with assistance

Step 7: Put the lights into light holder, Lead the wiring to the trailer, connect the coupler according to the wiring diagram

Step 8: Check all the bolts and tighten fix special tools.

 Part C: Take your trailer to the local traffic department for register with the Supplied VIN and cerificate of origin, please check the VIN (17 Nos and letters) starts from L4W.