Product Introduction:
Wooden board is usded for brick machine / wooden type pallet for concrete block machine qt4-15 qt6-15 qt8-15 qt10-15 qt12-15
1,Density: 0.8 g/cm3
2,Material: Pinus ponderosa(Yellow Pipe) (imported from the United States) or Masson Pine------Material determines the pallets surface wear resistance, contraction and expansion rate
3,Lumber moisture content:<12%
4,The pallets after degreasing drying treatment: Prevent deformation, reduce swelling and contraction
5,The static bending strength of the pallets(Longitudinal): ≥39MPa
6,Elastic capacity:≥3000 MPa
7,Between the lath of the pallets adopts a male-female seam stitching, with 4 pieces 8 mm screw locking screw fastening, products with C type steel fixed at both ends;
8,Pallets surface: Mechanical sanding treatment, ensure the smooth surface of the pallets
9,Pallets after immersion process: Extending the service life
10,Thickness:30-40mm
11,Length and width: Designed as per clients requirement
12,Used Lifespan: 6 years
13, Temperature resistance: Under 120 degrees Celsius
Detailed Pictures:
Main Technical Parameter:
| raw material | broad leaf hard wood | |
| Molding pressure | 2000 T | |
| pallet size for Semi-Automatic brick machine | QT4-24, 25, 26 | 850*550*25mm |
| Pallet size for Automatic brick machine | QT4 | 1010*550*25mm |
| QT6 | 940*830*25mm | |
| QT8 | 980*900*30mm | |
| QT10 | 1350*900*30mm | |
| QT12 | 1350*900*30mm | |
Send Message
