Model NO.
SD10-9D
Drive Wheel
4×2
Engine Capacity
＜4L
Seats
1
Horsepower
12HP
Tire Certification
ISO
Tire Design
Tubeless
Dumping Type
Front Lifting Style
Condition
New
Drive Model
4*2
Payload
1000kg
Skip Capacity
470L
Tipping System
Mechanical Tipping Hopper
Transport Package
20gp/ 6 Units Site Dumper
Specification
CE/ISO
Trademark
Topmac
Origin
Zhengjiang, Jiangsu
HS Code
8430509000
Production Capacity
50 Unit
After-sales Service:
6 Month
Warranty:
6 Month
Transmission Type:
Manual
Power:
Diesel
Load Capacity:
1-10t
Emission Standard:
Euro 2
Customized New Design Garden Mini Dumper with low noise
Site Dumper Model SD10-9D/SD10-9DA
Characters:
1. Compactable both in size and weight:
The rigid chassis dumpers are ideal equipment to work in areas with limited height.
2. Outstanding stability
Rigid chassis dumper allows high stability at full load, which can be driven on slopes and rough grounds.
3. Maintenance
It should be cleaned after work every day, kept lubricated at all points where grease nippers have been provided every week. The Engine oil is suggested to replace every 70 operating hours.
Technical Parameters
| Model | SD10-9D | SD10-9DA |
| Payload | 1000kg | 1000kg |
| Diesel Engine | Single cylinder, Water-cooling system with radiator | Single cylinder, Water-cooling system with radiator |
| Rated Power | 12 hp/2200 rpm | 12 hp/2200 rpm |
| Water capacity | 317 ltr (11.2 cuf) | 317 ltr (11.2 cuf) |
| Struck capacity | 467 ltr (16.5 cuf) | 467 ltr (16.5 cuf) |
| Heaped capacity | 765 ltr (27 cuf) | 765 ltr (27 cuf) |
| Min.Out turning circle Radius | 4 m | 4 m |
| Min. Ground Clearance | 200mm | 200mm |
| Discharging Height | 140mm | 140mm |
| Tipping System | Mechanical | Mechanical |
| Engine starting | manual | Manual and Electric |
| Electric Battery | No | 12 V, 75 amp. |
| Driver awning | No | Yes |
| Road speed | 5.8 ~23 km/h | 5.8 ~23 km/h |
| Reverse speed | 4.7 km/h | 4.7 km/h |
| Transmission | 4 forward & 1 reverse gear | 4 forward & 1 reverse gear |
| Chassis | Rigid frame | Rigid frame |
| Driving axle | 4×2 | 4×2 |
| Clutch | Constant-contact, Single disc, dry clutch | Constant-contact, Single disc, dry clutch |
| Dimension | 2650×1600×1450mm | 2650×1600×2100mm |
| Loading Plan | 1×20GP/6 Unit or1× 40HQ 14 Unit | 1×20GP/6 Unit or1× 40HQ 14 Unit |
Send Message
