Model NO.
304
Origin
China
HS Code
8708507190
Production Capacity
20000 PCS/Year
Certification:
ISO
Model:
304
Horsepower:
30-40HP
Transport Package:
Iron Frame
Specification:
1430(1530)*410*410
Trademark:
RN
Product Information:
>>Absorbing advanced driving axle technologies at home and abroad;
>>Using middle-arranged type transmission shaft and swing type center swing pin;
>>Inside structure includes center deacceleration,transmission differential and end deacceleration with double bevel gears;using whole type axle shell,which has good rigidity;
>>Using middle-arranged oil cylinder,which has compact structure and beautiful appearance;
>>On the end main pin steering position,using composite material sliding bearing structure,which makes the steering light and flexible;
>>Independent oil road,hydraulic pressure steering,steering angle to 45°;
>>Three kinds of driving axles including wide,middle and narrow types can weet demands from different agricultural tractor;
>>Adaptive for 30-55HP four-wheel driving tractor;
Technical Parameter:
>>Absorbing advanced driving axle technologies at home and abroad;
>>Using middle-arranged type transmission shaft and swing type center swing pin;
>>Inside structure includes center deacceleration,transmission differential and end deacceleration with double bevel gears;using whole type axle shell,which has good rigidity;
>>Using middle-arranged oil cylinder,which has compact structure and beautiful appearance;
>>On the end main pin steering position,using composite material sliding bearing structure,which makes the steering light and flexible;
>>Independent oil road,hydraulic pressure steering,steering angle to 45°;
>>Three kinds of driving axles including wide,middle and narrow types can weet demands from different agricultural tractor;
>>Adaptive for 30-55HP four-wheel driving tractor;
Technical Parameter:
| Performance parameter | RN40S Front driving axle (304) | |
| Driving ratio | 16.275 | |
| Outline dimension | 1430(1530)×410×410 | |
| Driving shaft front axle | Middle-arranged driving shaft | |
| Input shaft parameter | m=2 z=14 α=30° | |
| Connection bolt between hub and spoke | 6-M14×1.5 | |
| Distance between spokes (mm) | 1340/1440(Optional) | |
| The pressure of the hydraulic oil | 10±0.5 | |
| load bearing (kN) | 9.8 | |
| Net weight (KG) without oil | 156/160 | |
| Oil Volume | Middle (L) | 7.0/7.5 |
| Round edge (L) | ||
| Front Axle Position | Extroversion angle of front wheel | 3° |
| Introversion angle | 8° | |
| Retroverted angle | 0 | |
| Fore tie (mm) | 3~11 | |
| Steering method | Fluid-link steering | |
| Swing angle of the front axle | 12° | |
| Maximum steering angle of front wheel | 45° | |
| Steering Cylinder | Steering hydraulic cylinder type | Mid bidirectional |
| Diameter of steering hydraulic cylinder(mm) | 45 | |
| Steering hydraulic cylinder quantity | 1 | |
| Steering hydraulic cylinder travel(mm) | 160 | |
Send Message
