Bangzhao Electric Co.,Ltd is a company who was established in 2008 and specialized in developing and supplying of power products. The high performance of its products stems from the cutting-edge technology developed by the domestic top 100 engineers. During the past 10 years, we have been providing the best system solutions of Life PO4 battery pack cabinet,Boat inverter ,Car inverter,Solar inverter,Wind-Solar Hybrid inverter,lithium battery charger,PWM/MPPT solar charge controller,PV pump inverter,Explosion-proof inverter,DC combiner box,AC to DC battery cabinet ,Single Phase to 3 Phase Converter,Lithium battery storage system etc. to customers, it is widely applied in the industry of solar energy,wind power,water power,car,ship,train,hospital, aviation,automation,etc.
Our BZP series is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
- Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
- Intelligentized, modularized, simple structure design with powerful function.
- Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
- The output frequency can be setting via LCD panel, it's very convenient for customer.
- The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
- The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
- Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
- Low Frequency Transformer, which ensures that inverter has high efficiency.
- High conversion efficiency, Max. Efficiency≥94%,if 48VDC input,the efficiency can more than 85%.
- Adopts black pure aluminum radiator, which confirms the best radiating performance.
- Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
- Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
- Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
- Optional function
- RS485 remote monitoring,
- AC bypass input,
- built in solar charge controller or AC to DC battery charger.
| Model BZP- | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW | |
| Isolation mode | Low Frequency Transformer | ||||||
| DC Input | Rated voltage (Vdc) | 48V(96-800V range can be customized) | 192V | ||||
| Rated current(A) | 62.5A | 83A | 104A | 125A | 42A | 52A | |
| AC Output | Rated output power | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW |
| Output waveform | Pure Sine Wave | ||||||
| Rated Voltage | 380V±3% | ||||||
| Phases | 3 phase 4 wires | ||||||
| Rated current(A) | 4.5A per phase | 6A per phase | 7.5A per phase | 9A per phase | 12A per phase | 15A per phase | |
| Frequency | 50Hz or 60Hz | ||||||
| Rated output voltage range (V) | 110/120/220/230/240VAC optional | ||||||
| Power Factor(PF) | 0.99 | ||||||
| Overload Ability | 150%, 5 seconds | ||||||
| Efficiency | >93% | ||||||
| Waveform distortion rate (THD) | <3%(Linear load) | ||||||
| Dynamic Response (0 to 100% load) | 5%,≤50ms | ||||||
| Display | LCD | ||||||
| Running mode | Working continuously | ||||||
| Electrical insulation properties | 2000Vac, 1 Minute | ||||||
| Communication interface | RS485 (optional) | ||||||
| Protection Function | Protection | Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. | |||||
| Cooling method | Fan-cooled | ||||||
| Short-circuit protection | No automatic recovery, need to restart the machine | ||||||
| Working environment | Noise ( 1 meter) | ≤50dB | |||||
| Degree of protection | IP20(indoor) | ||||||
| Working Altitude(m) | ≤2000 | ||||||
| Working temperature | -25~+55ºC | ||||||
| relative humidity | 0~90%,non-condensing | ||||||
| Rack mounted type | Depth* Width * Height | 435x605x267mm | |||||
| IP65 no isolation type | 210*370*500mm | ||||||
| Stand type | 450*550*760mm | 550*550*860mm | |||||
Above parameter only for reference ,could be custom made to user specifications.
LCD Parameter :
