Technical Features:
² Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
² Intelligentized, modularized, simple structure design with powerful function.
² Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
² The output frequency can be setting via LCD panel, it's very convenient for customer.
² The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
² The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
² Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
² Low Frequency Transformer, which ensures that inverter has high efficiency.
² High conversion efficiency, Max. Efficiency≥97%
² Adopts black pure aluminum radiator, which confirms the best radiating performance.
² Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
² Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-400V or 300-800V.
² Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
² European CE (EMC, LVD) Certificate and accredited by Australian CEC, ERAC energy network.
We can make products according to your requirements.
| Model | BZEx-10KW | |
| Isolation mode | Low Frequency Transformer | |
| DC Input | Input rated voltage (Vdc) | Single phase 220V |
| Input rated voltage range | 110/120/220/230/240V/380V/415V/440V/480Vac optional | |
| Input rated current(A) | 45.5A | |
| AC Output | Rated output power | 10KW |
| Output waveform | Pure sine wave | |
| Phases | Three phase, 4 wire | |
| Output rated voltage | 380VAC ±3% | |
| Output voltage range | 220/380/400/415/440/480Vac optional | |
| Output rated current | 15A (phase current) | |
| Output Frequency | 50Hz/60Hz±0.05Hz | |
| Power Factor(PF) | 1 | |
| Overload Ability | 150%, 10s | |
| Efficiency | >94% | |
| Waveform distortion rate (THD) | <3%(Linear load) | |
| Dynamic Response (0 to 100% load) | 5%,≤50ms | |
| Display | LCD | |
| Running mode | Working continuously | |
| Electrical insulation properties | 2000Vac, 1 Minute | |
| Protection function | Protection | Input under voltage, over voltage, output over-current, short circuit, overheating etc. |
| Cooling method | Fan-cooled | |
| Short-circuit protection | No automatic recovery, need to restart the machine | |
| Working environment | Ambient temperature | -15~+55ºC |
| Using environment humidity | 0~90%,No condensation | |
| Noise ( 1 meter) | ≤50dB | |
| Degree of protection | IP20(indoor) | |
| Using altitude(m) | ≤2000 | |
| Dimension (mm) | 550x550x800mm | |
Voltage and frequency converter,
1,50HZ to 60HZ or 60HZ to 50HZ
2,Single phase 220VAC to 3 Phase220VAC
(L+N=120VAC to L1+L2+L3=220VAC,L1,L2,L3+N=127VAC)
3,2 phase 240VAC to 3 phase 220VAC
(L1+L2=240VAC,L1,L2 +N=120VAC to L1+L2+L3=220VAC,L1,L2,L3+N=127VAC )
4,3 Phase 220VAC to 3 phase 380VAC
(L1+L2+L3=220VAC,L1,L2,L3+N=127VAC to L1+L2+L3=380VAC,L1,L2,L3+N=220VAC)
5,3 Phase 380VAC to 3 phase 240VAC
(L1+L2+L3=380VAC,L1,L2,L3+N=220VAC to L1+L2+L3=240VAC,L1,L2,L3+N=138VAC)
Also can choose with DC input
Q 1. What's the payment term?
A. We accept TT,Western Union,Paypal,MoneyGram.
Q 2.How's the delivery time ?
A. Is due to order quantity, usually it will take about 3-7days for sample production,
Q 3.Tell me the standard of package?
A. For the small capacity, it use carton, but for big capacity, we should use honeycomb carton and pallet or wooden case for protection.
Q 4.Would you accept to use our logo ?
A.It's no problem to do OEM.
Q 5.We want to know month capacity.
A. It depends on which model.For example for relay type small capacity , month capacity can reach near 2000pcs and big capacity near 500pcs.
Q 6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q 7. What kind of certificate you have ?
A. Our company already achieve ISO9001, and for products, we have CE, SAA, G83 G59 etc .
Q8. What is the warranty period ?
A. Normally 1 year .
Q 8.How about the lifetime?
A:The life time for inverterl is 15-20years.
OEM Services
1.Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2.Label
Please offer us your own model numbers.
3. Manual
Please offer us the finished manual file that can be printed directly.
Lead Time
1.Sample orders will be delivered from our factory within 3-7 working days.
2.General orders will be delivered from our factory within 15-30working days.
3.Big orders will be delivered from our factory within 45 working days at most
Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other express.
2.By our forwarding agent(by air or by sea).
3.By your own forwarding agent.
4.By domestic forwarding agents to any city in China.
