4GQ
Portable Harvester
Sugarcrane
Hydraulic Turbine
Picking
Wheel Drive
Soft Shaft
ISO9001:2008
Red
New
Agriculture
FS
8030X2120X5070mm
China
Product Description
| No.s | Project | Unit | Designed Value | ||||||
| 1 | Model Name | / | 4GQ sugarcane harvester | ||||||
| 2 | The structure type of | / | Self-propelled segment wheel | ||||||
| 3 | Harvest way | / | Cutting sections of | ||||||
| 4 | Harvest the number of rows | line | 1 | ||||||
| 5 | To adapt to the space | m | Be equal or greater than 1.2 | ||||||
| 6 | Form a Complete set of power | Engine brand name | / | CUMMINGS | |||||
| Engine model | / | QSB5.9-C180-33 diesel engine | |||||||
| The structure type of | / | In-line,water-cooled Pressurized inter-cooled High pressure common rail | |||||||
| Rated power | KW | 133 | |||||||
| Rated speed | r/min | 2200 | |||||||
| 7 | Overall dimension (LxWxH) | Operating status(Max.limit) | mm | 8030x2120x5070 | |||||
| Packing status | mm | 7100x2120x3670 | |||||||
| 8 | Wheels | Front | Tyre size | / | 10.5/65-16 | ||||
| Wheel tread | mm | 1670 | |||||||
| quantity | No.s | 2 | |||||||
| Rear | Tyre size | / | 16.9-28 | ||||||
| Wheel tread | mm | 1620 | |||||||
| quantity | No.s | 2 | |||||||
| Wheel base | mm | 2570 | |||||||
| 9 | Walking type | / | wheel | ||||||
| 10 | Travel drive pattern | / | Hydraulic drive | ||||||
| 11 | Theoretical speed | Km/h | 0~28 | ||||||
| 12 | Pure work hour productivity | Hm2/h | ≥0.3 | ||||||
| 13 | Rated feed | Kgs/s | ≥0.6 | ||||||
| 14 | Whole weight | Kgs | 8100 | ||||||
| 15 | Min. Ground clearance | mm | 246 | ||||||
| 16 | Adjustment range of cutting device | mm | 245 | ||||||
| 17 | Slight part Cutting device | Structure type | / | Single disc cutting knife | |||||
| Max rotating diameter | mm | 585 | |||||||
| Rotating speed | R/min | 430 | |||||||
| Knife disc | Size(diameterxthickness) | mm | 450x8 | ||||||
| quantity | No.s | 1 | |||||||
| Blade | Size(LxWxThickness) | mm | 96x90x2.5 | ||||||
| quantity | No.s | 6 | |||||||
| Driving type | / | Hydraulic drive | |||||||
| 18 | Sugarcane Cutting device | Structure type | / | Double disc cutting knife | |||||
| Max rotating diameter | mm | 710 | |||||||
| Rotating speed | R/min | 550 | |||||||
| Knife disc | Size(diameterxthickness) | mm | 560x14 | ||||||
| quantity | No.s | 2 | |||||||
| blade | Size(LxWxthickness) | mm | 240x90x6 | ||||||
| quantity | No.s | 10 | |||||||
| Driving type | / | Hydraulic drive | |||||||
| 19 | Clamp device | Structure type | / | / | |||||
| Clamp chain/tie quantity | No.s | / | |||||||
| Clamp chain/tie space | mm | / | |||||||
| The min.space between the knife disc And the closed clamp chain/tie | mm | / | |||||||
| Driving type | / | / | |||||||
| 20 | Leave Stripping device | Stripping roller | type | / | / | ||||
| quantity | No.s | / | |||||||
| Size(rotating diameterxthickness) | mm | / | |||||||
| Driving type | / | / | |||||||
| Rotating speed | R/min | / | |||||||
| 21 | Segment Cutting device | type | / | Flat counter-roll cutter | |||||
| blade | Size(LxWxthickness) | mm | 580x75x8 | ||||||
| Quantity on each Counter-roll cutter | No.s | 2 | |||||||
| Counter-roll cutter | Rotating diameter | mm | 325 | ||||||
| quantity | No.s | 2 | |||||||
| Rotating speed | R/min | 210 | |||||||
| The length range of segment | mm | 220 more or less 30 | |||||||
| Driving type | / | Hydraulic drive | |||||||
| 22 | Selecting device | type | / | Cylindricadel spiral roller | |||||
| Roller size | Diameter at big end | mm | 140 | ||||||
| Diameter at small end | mm | 140 | |||||||
| length | mm | 1400 | |||||||
| Helical angle | degree | 14.6 | |||||||
| Rotating speed | R/min | 180 | |||||||
| Driving type | / | Hydraulic drive | |||||||
| 23 | Cane holding device | type | / | Conical spiral drum | |||||
| Drum size | Diameter at the big end | mm | 230 | ||||||
| Diameter at the small end | mm | 190 | |||||||
| length | mm | 1150 | |||||||
| Helical angle | degree | 14.6 | |||||||
| Rotating speed | R/min | 176 | |||||||
| Driving type | / | Hydraulic drive | |||||||
| 24 | Air separation Unit1 | type | / | Axial flow fan | |||||
| fan | Rotating diameter | mm | 950 | ||||||
| Rotating speed | R/min | 1500 | |||||||
| Fan blade | thickness | mm | 5.5 | ||||||
| quantity | No.s | 3 | |||||||
| Driving type | / | Hydraulic drive | |||||||
| 25 | Air separation Unit 2 | type | / | / | |||||
| fan | Rotating diameter | mm | / | ||||||
| Rotating speed | R/min | / | |||||||
| Fan blade | thickness | mm | / | ||||||
| quantity | No.s | / | |||||||
| Driving type | / | / | |||||||
| 26 | Collecting and Dumping device | Cane collecting type | / | Collecting cart bin | |||||
| Max.collecting quantity | M3 | 4.0 | |||||||
| Dumping type | / | High level self-dumping | |||||||
| Dumping driving type | / | Hydraulic drive | |||||||
