1.3D turnplate standard .
2.Pumps and seal kits ,ball valves are import from Italy
3.All the hydraulic cylinder are import from Taiwan
4.Inside of cylinder assy has the special treatment and make sure that is doesn't leak oil
5.24V control system and limited switch
6.Min height on ground for 150mm platform length 4500mm
Technical data:
| Model | CR-6108D |
| Load capacity | 3.5T |
| Rolling jack capacity | 3T |
| Horse power | 3HP |
| Power | 2.2kw |
| Power supply | AC380V/220V 50Hz/60Hz |
| Extrawide runway | 640mm |
| Max. lifting height | 1800(mm) |
| Rolling Jack lift height | 400mm |
| Raise Time | Approx. 12sec |
1. Hydraulic cylinders: 3 hydraulic cylinders on one side (2 in the front and 1 in the back), a total of 6 hydraulic cylinders, make the lift lift up more quickly, and the X-arm is safer and stronger during the lifting.Other manufacturers only have 6 hydraulic cylinders
2. Unlocking cylinder: double cylinder safety device, 2 cylinders on one side (located next to the hydraulic cylinder at the back), one is broken, the other still works, a total of 4 cylinders, separate the safety teeth more powerfully and quickly lift up.
3. The thickness of the platform is 19cm, which is ultra-thin. Other manufacturers are 22cm thick on the side slides. The orange guards prevent the car from running forward.
4. Standard ultra-thin corner disc, other manufacturers do not. The line from the control cabinet to the lift is protected by the bottom plate and will not be crushed by cars or people.
5. Horizontal bars: one at the front and one at the back to prevent the platform from being uneven during the installation of the secondary lift.
6. The electric wire is different from other manufacturers.
Control system: There are two valves, one to control the oil outlet and the other to control the oil return. Pumping station (motor): The wire is copper wire, the shell is all aluminum alloy, and the heat dissipation is fast
7. Oil-Water Separator: Filters water and oil, reducing breakdowns and Extend the life of the machine
Guangzhou Baohua Auto Maintenance Equipment Trade Co., Ltd is founded in 1998 and located in Guangzhou city. We have a professional research technical team in automobile maintenance Equipment.
We have more than 1000 kinds of car equipment and 2000 kinds of accessories. We are Manufacturer of car lift, spray booth, wheel alignment, A/C refrigerant recycle and fill machine, Nitrogen generator, Injector tester, Pneumatic sander with extraction system, automatic Car/Bus washing machine. What's more, we can provide our clients with a whole set of Garage Equipment, sheet metal Equipment and Tire shop repair Equipment.
We insists on the principle of "quality first and service first, we pay great attention to our reputation. So our products are sold well at home and overseas because of good quality product and excellent service. We will establish a mutual benefit business relationship. The most important is that we can offer our customers one-stop service.
We insists on the principle of "quality first and service first, we pay great attention to our reputation. So our products are sold well at home and overseas because of good quality product and excellent service. We will establish a mutual benefit business relationship. The most important is that we can offer our customers one-stop service.
