NPR 5cbm Waste Truck 98HP 5000L Garbage Truck
How the Garbage Compactor Truck Works?
The garbage compactor trucks are loaded by sanitation engineers along neighborhood streets. The trash is loaded into a hopper in the back of the truck of rear loaders. Hydraulic cylinders operate the compacting mechanism, which takes the trash out of the hopper and places it into the body of the truck.
How much does a Garbage Truck hold?
Different types of garbage trucks that hold different amounts of waste. The truck that comes through your neighborhood can hold anywhere from 5CBM to 23CBM of waste.
The available chassis brands for Garbage Compactor Truck are ISU.ZU, SINOTRUK, DONGFENG, FAW, FOTON, JAC, JMC, HYUNDAI, etc.
| Garbage Truck Specification | ||
| General | Model | CLW5070YLCQL5 |
| Chassis Brand | ISU.ZU | |
| Wheelbase | 3360 | |
| Overall Dimension | Appro. 6700*2300*2800 (mm) | |
| Max Axles Payload | Appro. 7300 (kg) | |
| Truck Tare Weight (kg) | Appro. 5000 (kg) | |
| Garbage Container Capacity | Appro. 6CBM | |
| Drive Type | 4x2, Left Hand Drive with power assisted steering | |
| Drive Speed | ≥90Km/h | |
| Cab | Type | Single row cab, forward control type, all welded steel cab of tilt type, adjustable driver seat |
| No of Seats | 2 persons, with safety belts | |
| Number of Doors | 2 | |
| Air Conditional | With air conditional | |
| Electric System | 24V | |
| Audio System | FM/AM radio, CD/USB player | |
| Engine | Brand | ISU.ZU |
| Model | 4JB1CN | |
| Fuel Type | Diesel Fuel | |
| Emission Standard | Europe 4 | |
| Type | Water-cooled four-stroke, direct injection, turbocharged & intercooled, High pressure common rail fuel system, cold start. | |
| Nos of Cylinder | 4 | |
| Cylinders Arrangement | In-line | |
| Max Output Power | 72(kw) | |
| Exhaust | 2771(ml) | |
| Max output power/rated speed | 98/3400 (hp/rpm ) | |
| Max torque/rotate speed | 220/1700 (N.m/rpm) | |
| Bore x Stroke | 93*102mm | |
| Gear Box | Model | MSB |
| Type | Manual | |
| Forward Speeds | 5 | |
| Rear Speeds | 1 | |
| Clutch | Type | Single-plate dry diaphragm spring clutch |
| Bridge | NOs of Axle | 2 |
| Front axle load-bearing (kg) | 2500 | |
| Rear axle load-bearing (kg) | 4800 | |
| Electric System | Voltage | 24V |
| Braking System | Oil brake | |
| Tire | Type | 7.00-15 |
| Nos | Total 7 pieces, including one spare tire | |
| Garbage Compactor Truck Upper-Body Specification | ||
| Garbage Container | Volume | 5CBM |
| Material | Q345 | |
| Thickness (side/bottom) | 4mm/4mm | |
| Hydraulic Pump | 1 set | |
| Multi-way Valve | 1 set | |
| Flap Cylinder | 2 set | |
| Lifting Cylinder | 2 set | |
| Scraper Cylinder | 2 set | |
| Skateboard Cylinder | 2 set | |
| Push plate Cylinder | 1 set | |
| The Electromagnetic Valve | 2 set | |
| Dirty Tank Volume | 200L | |
| Filing Time | 8-10s | |
| Filling Cycle Time | 50-60s each time | |
| Discharge Type | Flat-pushing and Dumping | |
| Dumping Time | 30-40s | |
| Hydraulic Pressure | 16Mpa | |
| Controlling Way | Manually and Electrical control | |
Garbage Compactor Truck/ Garbage Compressed Truck/ Compactor Garbage Truck/ Compressed Garbage Truck/ Waste Compactor Truck/ Waste Compressed Truck/ Compactor Waste Truck/ Compressed Waste Truck/ Refuse Compactor Truck/ Refuse Compactor/ Garbage Truck/ Waste Truck/ Garbage Compactor/ Waste Compactor/ Rubbish Compactor Truck/ Compactor Rubbish Truck/ Rubbish Truck/ Rear Loader Garbage Truck/ Rear Loader Waste Truck/ Rear Loader Rubbish Truck/ Rear Loading Garbage Truck/ Rear Loading Waste Truck/ Rear Loading Rubbish Truck/ Rear Loader Garbage Compactor/ Rear Loader Garbage Compactor Truck/ Rear Loading Garbage Compactor Truck/ Rear Loader Garbage Truck
5CBM Garbage Compactor Truck / Waste Compactor Truck
AFTER-SALE SERVICE
Warrant special vehicles and equipment we supplied are manufactured with mature technology, nice workshop, under strict quality control . They are free from defects in workmanship and material . With correct use and normal maintenance , you will enjoy a happy service on your vehicles or equipment as below :
★ Function Life
The vehicles are expected to be functioning 10 (ten) years with availability of spare parts.
★ Warranty
The customers can enjoy a maximum warranty period of 12 months or 10000 kilometers, whichever comes first, from shipment date on Bill of Lading.
During this period, if any failure, we will send replacement parts and components to customers by DHL, UPS, FEDEX free. Normal wear or fast consumables are excluded.
After this period, the parts can be provided at cost price.
This warranty does not cover damage due to improper use, accident or misuse or damage due to any unauthorized services.
If the goods are determined to be defective in materials or workmanship, we will, at ours option, repair or replace the goods.
★ Technical Support
For our supplied products, you can forever enjoy technical support whatever by phone call or email. We will respond aggressively to provide a prompt solution.
★ Onsite Training
On-site training could be executed if this term is included in the contracts agreed.
★ Onsite Service
We can assign our engineers to go to destination for on-site service if this term is included in the contracts agreed. Even service workshop could be built if the order comes to certain quantity.
