MO-3B
1 Year
1 Year
CE
New
DC Motor
250-300mm
250-300m
Diamond Bit
Compound
GM
OEM
Pack Carton
small
China
Product Description
MO-3B Delication breaker Pneumatic air hammer Pneumatic rock drill MO-4B MO-2B
G10 Pneumatic Pick
Instruction
G10 pneumatic pick is suitable for drilling in mine, crushing incompetent bed, concrete and clay, destroying hard or frozen stratum and other athletics occasion which need impact.
Technical Specification
Total Length 570mm
Weight 10kg
Rammerweight 0.9kg
Rammer dia 38mm
Rammer stroke 155mm
Air pressure 0.63Mpa
Impact energy 43J
Impact frequency 16Hz
Air consumption 26L/s
Air pipe inner dia 16mm
Drill 500mm
Maintenance
Pneumatic pick is a exactitube tool that make reciprocating impact, should pay attention to maintenance.
Please abide the following maintenance rules.
1, Air pipe inner dia is 16mm and length is not excess 12 m, the air pressure should be kept at 0.5-0.6Mpa, and keep air pipe clean and fasten hose nipple.
2, When assembling machine, check clearance between drill shank and fixing sleeve, hold handle and force pressure to it slowly, ensure that work normally.
3, Working regularly, oil machine through the pipe connecter every 2-3 hours(3-4.5°E50 turbine oil)
4, Do not insert the whole machine into ledge,when drilling incompetent bed.
5, When machine was jammed in crevice, do not draw out it powerfully, it will damage machine.
6, If dirty block strainer, romove it.Don't take off strainer.
7, When using machine,dismantle it at least twice a week, use diesel oil to clean and dry, then oil, later assemble and operate machine.
8 ,If machine should stop for along time, dismantle and clean it, then oil and keep in storehouse.
Product Description:
1.It can be applied to the uran construction for breaking the old roadway, to the facilities installation of industrial and mining enterprise for breaking the original concrete ground.
2. It can be applied to break firm and freezed ground in civil engineering,substruction and civil air defence works and so on.
3. It can be applied to cut coal layer and break soft mineral in mining industry.
| Model | MO-4B | MO-3B | MO-2B | |||
| weight | 9.6KG | 9KG | 8.5KG | |||
| Impact Energy | 55J/MIN | 44J/MIN | 39J/MIN | |||
| Impact Frequency | 17Hz | 19.2Hz | 22.5Hz | |||
| Working Pressure | 0.63 Mpa | 0.63 Mpa | 0.63 Mpa | |||
| Air Consumption | 1.5m3/dcm•kw | 1.5m3/dcm•kw | 1.5m3/dcm•kw | |||
| Dia of Air Hose/Pick | 24mm | 24mm | 24mm | |||
| Length of Tail Pick | 70mm | 70mm | 70mm | |||
G10 Pneumatic Pick
Instruction
G10 pneumatic pick is suitable for drilling in mine, crushing incompetent bed, concrete and clay, destroying hard or frozen stratum and other athletics occasion which need impact.
Technical Specification
Total Length 570mm
Weight 10kg
Rammerweight 0.9kg
Rammer dia 38mm
Rammer stroke 155mm
Air pressure 0.63Mpa
Impact energy 43J
Impact frequency 16Hz
Air consumption 26L/s
Air pipe inner dia 16mm
Drill 500mm
Maintenance
Pneumatic pick is a exactitube tool that make reciprocating impact, should pay attention to maintenance.
Please abide the following maintenance rules.
1, Air pipe inner dia is 16mm and length is not excess 12 m, the air pressure should be kept at 0.5-0.6Mpa, and keep air pipe clean and fasten hose nipple.
2, When assembling machine, check clearance between drill shank and fixing sleeve, hold handle and force pressure to it slowly, ensure that work normally.
3, Working regularly, oil machine through the pipe connecter every 2-3 hours(3-4.5°E50 turbine oil)
4, Do not insert the whole machine into ledge,when drilling incompetent bed.
5, When machine was jammed in crevice, do not draw out it powerfully, it will damage machine.
6, If dirty block strainer, romove it.Don't take off strainer.
7, When using machine,dismantle it at least twice a week, use diesel oil to clean and dry, then oil, later assemble and operate machine.
8 ,If machine should stop for along time, dismantle and clean it, then oil and keep in storehouse.
