Sinotruk LHD or Rhd 4X4 6X6 Anti-Riot Water Cannon Full Road Condition off Road HOWO Water Cannon Vehicle Truck

As an effective, non-injurious main riot dispersal equipment, the riot control water cannon vehicle is mainly used to maintain public order, stop terrorist riots, prevent riots, maintain stability, armed law enforcement, disperse people masses and other tasks. By cooperating with the vehicle and using the water cannon and pulse cannon to carry out non-lethal attacks from a distance, the riot control team can effectively quell the riot, control the further escalation of the riot, disperse the riot group, and carry out strong armed deterrence against violent terrorists. ·According to the technical requirements of anti-riot water cannon truck, combined with the company's mature design technology and the actual application of this vehicle and the relevant national standards and design this anti-riot water cannon truck. ·This vehicle is equipped with special high-pressure diesel engine fire pump, special firefighting turret, hydraulic control system, water cannon integrated control system, advanced communication system, warning system and lighting system, etc. The riot water cannon truck has a variety of riot control functions such as suppression, marking, dispersal, firefighting and obstacle clearing in the actual riot control process. It is one of the important weapons and equipment to deal with sudden mass events.

Quality parameters	Chassis mass(kg)			8200	Splitter	Model		ZQC1200
	Overall mass axle load distribution (kg)		Front Axle	5000		Speed ratio		1/1.75
			Rear Axle	3200		Split Torque Ratio		1/2.39
	Maximum permissible total mass (kg)			18000	Drive Axle	Model		ST16
	Maximum allowable axle load (kg)		Front Axle	7000		Main reducer speed ratio		Speed ratio	5.73
			Rear Axle	13000				Selectable speed ratios	/
	Quasi-trailer total mass(kg)			/		Differential Lock		Wheel Difference
	Maximum permissible load on the traction seat Capacity(kg)			/	Front drive axle	Model		STR
Performance Parameters	Performance parameters Maximum speed (km/h)			90		Main reducer speed ratio		Speed ratio	5.73
	Minimum turning diameter(m)			21.5				Speed ratio	/
	Maximum climbing degree (%)			≥40	Wheels	rim	8.5-20
	Maximum standing slope (%)			≥20		Wheels	12.00R20
	Fuel tank volume(L)			400	Frame	Type		Ladder frame
Dimensional Parameters	Dimension	Length(mm)		8092		Section of main longitudinal beam(mm)		Slot type 300×80×8
		Width(mm)		2520		Cross section of sub longitudinal beam(mm)		Slot type 280×70×5
		Height(mm) (no load)		3200		Width of frame assembly (mm)		Before 1000 After 850
	Wheelbase(mm)		4600		Suspension	Front	Type	Longitudinal semi-elliptical steel plate spring with cylinder Type Shock Absorber

	Wheelbase(mm)	Front Wheel	2022			Steel plate spring Number of sheets	4 or 9
		Rear Wheel	1850		Back	Type	Longitudinally mounted semi-elliptical leaf springs
	Minimum ground clearance(rear axle Under)(mm)		314			Steel plate spring Number of sheets	9+6
	Approach angle (°)		31	Steering system	Steering type/model No.		8118
	Departure angle (°)		30 (with rear spare tire for 21)		Steering gear speed ratio		22.2~26.2
	Front overhang(mm)		1602		Max. pressure of steering oil pump (kPa)			20000
	Rear overhang(mm)		1890		Steering type			Steering Wheel
	Cargo compartment size/frame available length Dimension(mm)		5500×2320× 600	Brake System	Rated working pressure(kPa)			850
	Traction seat height from ground (mm) (empty) Load)		/		Travel brake system type			Double circuit air brake
	Center of gravity height (mm) (no load)		900		Braking force adjustment type			ABS
cab	Type	HOWO			Parking brake system type			Spring-loaded energy-saving air-break brakes
	Number of occupants	2			Auxiliary brake system type			Engine exhaust brake
	Turning radius(mm)	2970		Department of Electricity	Line type			Two-wire system, power control positive
Engine	Model	D10.28-50			Voltage(V)			24V
	Total Displacement(L)	9.726			Generator power (kW)			2000W
	Rated power kW/(r/min)	206/1900			Battery voltage/capacitance (V/Ah)			12/165
	Max. torque Nm/(r/min)	1190/(1200-1500)		Power take-offs	Model			/
Clutch	Model	430 type pull type diaphragm spring clutch Clutch			Speed ratio			/
	Manipulation method	Hydraulically operated air-assisted			Interface form			/
Transmission	Model	HW15710C		Other
	Forward gear speed ratio	10.73,7.98,5.91,4.38, 3.29,2.45,1.82,1.35, 1.00,0.75
	Reverse gear speed ratio	10.49,2.39
	Optional transmission type No.	/

1) We are manufacturer and have more than 10 years professional exporting experience.
2) 1 set truck or small truck parts order can be accepted.
3) Many colors and accessories can be customized.
4) The truck performance is adjustable according to your demand.

More Products:


Training and Service:

Customers and friends from overseas:

1: Payment: 
A:30% advance payment after signed the contract, 70% balance should be paid before delivery. We can accept T/T and L/C
2. Delivery time: 
A:25-45 working days after payment is received. According to different trucks models
3. How about your product quality? 
A: The products have passed the ISO, CCC, SGS, BV, and CONTECNA qualification certification. All our spare parts are from the original manufacturers with original part number and and anti-fake label, the quality is 100% guaranteed. 
4: How long is the warranty period?
A:The warranty of our products is 1 year or 50000km, which comes first