FT232rl Ftdi USB 3.3V 5.5V to Ttl Serial Adapter Module for Arduino FT232 PRO Mini USB to Ttl 232

Support windows8.
TXD, RXD, RTS#, CTS#: Use curved pin header to lead.
FT232R introduction:

  With the development of computer technology, parallel ports and serial ports have slowly disappeared on PCs. Nowadays, even desktop computers have few parallel ports. But for engineers, both parallel and serial ports are essential interfaces, especially serial ports. For computers without a serial port, a convenient solution is to use a USB-to-serial chip to virtualize a serial port. Many manufacturers produce such chips, such as CP210x series from silicon LABS, TUSB3410 from TI, CH34x series from Nanjing Qinheng, and FTDI FT232 series, Prolific PL230x series, ARK3116, etc. From the perspective of stability, the FT232 series is still reliable, and you can use it to debug the program without worrying about the blue screen.
  The FT232R chip is a single-chip solution. Generally, peripherals are not required for general use. Even the crystal oscillator, USB matching resistor, and EEPROM for product information have been integrated inside. FT232R also has some more useful functions. For details, please refer to the FT232R data sheet.

Hardware introduction:

·Adopt FT232RL chip of FTDI Company;
· Lead out all signal ports of FT232RL chip, TTL/CMOS level;
·RXD/TXD transceiver communication indicator;
·USB power supply, optional 5V or 3.3V interface level (if other levels are needed, you can directly provide the target voltage on the VCC and GND pins)