The DCL12 & DCL12-S1 dynamometer tension link load cells are designed for the lowest profile possible because headroom is a precious commodity in many lifting applications. The lifting eyes are rotated 90 degrees from each other allowing another axis of movement which is essential for lifts where the load may sway. The DCL12 is manufactured from alloy steel and is powder-coated to prevent corrosion. The load cell is built with a connector and includes the mating connector with a 10 meter 6-conductor cable (load cell cable length can be customized at the time of order).
Load Cell Central also offers other tension link dynamometers with integral cables, stainless steel construction, and submersible load cells.
Capacities
(t) 0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100
| Type | Technical Parameters |
| Nominal Load Range | 5~50t |
| Analog Output | 1.0±0.015mV/V |
| Input Resistance | 780±5Ω(ohms) |
| Output Resistance | 700±Ω(ohms) |
| Operating Voltage | 10~12VDC |
| Effect of Temperature | 0.05%FS/10ºC |
| Operating Temperature | -40~+85ºC |
| Safe Load Limit | 200%FS |
| Safety Margin against Breakage | 500%FS |
| Material | High performance alloy steel |
| Protection Type | IP 67 |
| Zero Balance | 1.0±% of rated output |
