TS900
Third-Party Service
12 Months
Wheel Tractor
Farm Tractor, Garden Tractor, Lawn Tractor
ISO, CCC, ISO/TS16949
4WD
Gas / Diesel
6-10 Years
Large
Red Yellow
New
18.5
14.9-30
6.5-20
50
Mingsin
4027*2050*2670
China
8701941010
Product Description
| Model | TS900 Tractor | |
| Drive Type | 4×2 | |
| Engine | ||
| Engine Manufacturer | YTO Group Corporation | |
| Engine Model | LR4M5-23 | |
| Engine Type | vertical,water-cooled,four-stroke,direct injection | |
| Max Torque(N·m)/Revolving Speed(rpm) | ≥372/2300 | |
| Displacement(L) | 5.13 | |
| Cylinder Diameter * Stroke | 110×135 | |
| Fuel Tank Capacity(L) | 150 | |
| Engine Rated Power (kW/rpm) | 66.2 | |
| Rated Operating Conditions Fuel Consumption Rate(g/kW·h) | ≤242 | |
| Drive Train | ||
| Clutch | dry,single disc,independent dual-stage | |
| Standard PTO speed(rpm) | (760,1000)/(540,1000) | |
| Gears | 8F+4R/16F+8R(creeper) | |
| Steering type | hydraulic steering | |
| Gear Shift Mode | meshing gear shift | |
| Speed Range | 0.41~31.11 | |
| Break System | ||
| Service Brake | pedal,mechanical drive,hydrostatic,disc | |
| Parking Brake | handle operation,multi friction surface mechanical compress,oil bath type | |
| Hydraulic System | ||
| Hydraulic Output Flow(L/min) | 50 | |
| Hydraulic Output Valve | ways | |
| Working Device | ||
| Three-Point Suspension | postposition, Category 2 | |
| Max.Lifting Capacity(kN) | 15.9 | |
| Tillage Depth Adjustment | draft and position adjustable,floating control | |
| General Parameter | ||
| Overall Dimension(L×W×H)mm | With cab | 4027×2050×2670 |
| Without cab | 4027×2050×2670 | |
| Wheelbase(mm) | 2210 | |
| Min. operating weight(kg) | With cab | 3600 |
| Without cab | 3350 | |
| Min. Ground Clearance(mm) | 418 | |
| Min.turning radius(mm) | 3400 | |
| Front Tire | 6.5-20 | |
| Rear Tire | 14.9-30 | |
| Rated Pull | 18.5 | |
| Optional Disposition | ||
| hydraulic pressure lifter,air brake, swing draw bar,creeper gear,paddy tire,2 group hydraulic output | ||
QC FIow:
1. Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's reguirement.
Department introduction of QC/Technical Support
In order to get super quality, we have special QC department to control the product quality. Thisdepartment is composed by experienced engineers who can offer us strong technical support easily.The engineers will inspect product quality both in order production and after order production tomake sure each shipment we send to our customers is in the best status, With their strict quality control,our consistent quality wins us more and more orders from our international customers.
1. Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's reguirement.
Department introduction of QC/Technical Support
In order to get super quality, we have special QC department to control the product quality. Thisdepartment is composed by experienced engineers who can offer us strong technical support easily.The engineers will inspect product quality both in order production and after order production tomake sure each shipment we send to our customers is in the best status, With their strict quality control,our consistent quality wins us more and more orders from our international customers.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering allmanufacturing defects, ME Our manufacturing facility is completely computerized to provide ourcustomers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spareparts within 15 business days or sooner. Currently, part numbers are not available on-line. You mayhowever determine the part number from your Parts Book or, if it is a simple part, you may describethe part and send us an order online. lf you are not sure, please Contact Us .
Shipment: We can shipfrom our port in Qingdao or Shanghai, China to anywhere in the world within short days.
We offer our customers technical assistance and a full one year warranty on all products covering allmanufacturing defects, ME Our manufacturing facility is completely computerized to provide ourcustomers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spareparts within 15 business days or sooner. Currently, part numbers are not available on-line. You mayhowever determine the part number from your Parts Book or, if it is a simple part, you may describethe part and send us an order online. lf you are not sure, please Contact Us .
Shipment: We can shipfrom our port in Qingdao or Shanghai, China to anywhere in the world within short days.
