Model NO.
hose
Car Make
Oil Tank Truck
Fuel
Gasoline
Body Material
Steel
Component
Fuel Filler Tube
Certification
ISO9001
Stroke
4 Stroke
Cylinder
Single Cylinder
Fuel Saver Type
Additive Burning with Fuel
Carburettor Type
Horizontal Draught
Quality
100% Tested
Usage
Gasoline
Size
Standard Size
Certificate
ISO9001:2008
Material
Synthetic Rubber
Name
Silicone Rubber Braided Tube
Type
Soft Hose
Reinforcement
High Tensile Steel Wire Braided
Trademark
aistar
Transport Package
Individual Boxed
Specification
20.2kg
Origin
China
The premium fuel dispensing hose assemblies come with swaged stainless steel full ferrules and BSP hose tails with sealing o rings. As well as in an assembly, this gasoline hose is available by the metre and in coils if you have a large requirement.
Features of the Premium Gravity/Pump Fuel Dispensing Hose:
Diesel/oil resistant construction
Anti-static soft wall with NBR cover
Synthetic textile yarn reinforcement
ID 19 or 25mm / OD 27 or 34mm
Temperature -25°C/+70°C
Different lengths of diesel hose available upon request
¾" assemblies available upon request
Assemblies c/w 1" BSP hose tails with sealing o rings & swaged stainless steel full ferrules
LPG Hose
LPG hose construction for a given application depends upon the product being transferred and the operational parameters. In particular, refrigerated LPG has a different set of hose system transfer requirements to that of LPG at ambient temperatures.
The design, manufacturing and prototype testing of Oil & Marine LPG hoses for offshore applications have been witnessed, reviewed and approved by the American Bureau of Shipping (ABS). One or more standards may apply, depending upon the particular application.
Cryogenic LPG Hoses
Acceptance criteria for -50˚C operation included the following:
--Long term LPG soak test
--Gas permeation and decompression test
--Thermal insulation test
--Thermal cycling test
--Fatigue testing
Construction features of the cryogenic LPG hose construction include:
---End fitting materials for low temperature service
---Reinforced lining applied along the hose bore to reduce the risk of explosive decompression
---"Bleeder cords" to exhaust any permeated gas to the hose ends
Operational considerations include the possible need for integral ballast to keep a submarine hose submerged in the case of gaseous product, and flange insulation kits to provide electrical discontinuity.
Contact us for advice on LPG hose construction features to suit your particular application.
The design, manufacturing and prototype testing of Oil & Marine LPG hoses for offshore applications have been witnessed, reviewed and approved by the American Bureau of Shipping (ABS). One or more standards may apply, depending upon the particular application.
Cryogenic LPG Hoses
Acceptance criteria for -50˚C operation included the following:
--Long term LPG soak test
--Gas permeation and decompression test
--Thermal insulation test
--Thermal cycling test
--Fatigue testing
Construction features of the cryogenic LPG hose construction include:
---End fitting materials for low temperature service
---Reinforced lining applied along the hose bore to reduce the risk of explosive decompression
---"Bleeder cords" to exhaust any permeated gas to the hose ends
Operational considerations include the possible need for integral ballast to keep a submarine hose submerged in the case of gaseous product, and flange insulation kits to provide electrical discontinuity.
Contact us for advice on LPG hose construction features to suit your particular application.
