Model NO.
T380
Wiring Type
Four-Wire
Measuring Medium
Liquid
IP Rating
IP68
Certification
RoHS
Customized
Customized
Transport Package
Foam+Carton
Specification
dia. 19mm
Trademark
Runpaq
Origin
China
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Integration
Material:
Stainless Steel
Heat-resistant Pressure Transmitter Piezoresistive Silicon Die Pressure sensor for Construction Machinery
T380 line is sputter film pressure transmitter featuring heat-resistance, wide range and high accuracy. The product is widely used for the measurements of gas and liquid, such as water, oil and other light corrosive liquid and gas.
Wiring diagrams
Dimensions
Wiring diagrams
Specification
Notice:1MPa=10bar; 1bar≈14.5PSI; 1PSI=6.8965kPa; 1kgf/cm2=1atm; 1atm≈98kPa
Model selections
T380 line is sputter film pressure transmitter featuring heat-resistance, wide range and high accuracy. The product is widely used for the measurements of gas and liquid, such as water, oil and other light corrosive liquid and gas.
| Application | Key features |
| • Construction Machinery • Automobile engines • High-pressure common-rail engine • Hot and Cold environment • Deep well hydraulic detection • Boiler pressure detection • Natural gas storage equipment • Hydraulic lubrication | • Pressure type: Gauge/Seal gauge/Differential Pressure • Customized working temperature: -50ºC~230ºC • Sputter film sensor • All-welded, no O-rings • Range: 0~0.1MPa~200MPa • Accuracy: ±0.1%F.S, ±0.25%F.S, ±0.5%F.S • Stability0.25%F.S/Year(typical), 0.4%F.S/Year(maximum) • Signal Output: 4~20mA, 0~10/20mA, 0/5~10V • Power supply: 12~30Vdc |
Wiring diagrams
| Electric connect | |||
| Cable | two wires | three wires | Hirschmann |
| Red | power supply | power supply | 1 |
| Blue/Green | output | output | 2 |
| Black | shield | GND | 3 |
| Yellow | - | shield | GND |
| Signal output | |||
| Two wires | 4~20mA | ||
| Three wires | 0~5V, 0~10V, 0~20mA, 0~10mA | ||
| Electric connection | |||
| Cable | two wire | three wire | GX16-7 |
| Red | power supply | power supply | 1 |
| Blue/green | output | output | 2 |
| Black | shield | GND | 3 |
| Yellow | - | shield | 4 |
| Signal output | |||
| Two wires | 4~20mA | ||
| Three wires | 0~5V, 0~10V,0~20mA, 0~10mA | ||
Wiring diagrams
Specification| Measure range | 0~0.1MPa…200MPa | Insulation | >100MΩ@50V | ||
| Overload pressure | 2 times of rated pressure | Electric strength | 500V @60second | ||
| Burst pressure | 4 times of rated pressure ±0.5/55ºC | Vibration/shock | 10g/5~2000Hz, axes X/Y/Z20g sine 11ms | ||
| Accuracy | ±0.1%F.S; ±0.25%F.S; ±0.5%F.S | Pressure type | G, S, response: 10mS | ||
| Stability | 0.25%F.S/Y, 0.4%F.S/Ymax | Display | -999 ~ 1999 | ||
| Work temp. | -50~150ºC; (Customize -50~230ºC) | Pressure durability | 2 x 106 pressure cycle@25ºC | ||
| Compensate temp. | -20~120ºC | Safety level | Intrinsically Safe E; Explosion-proof D | ||
| Medium compatibility | All 1Cr18Ni9Ti-compatible corrosive mediums | EMC | EN50081-1/-2; EN50082-2 | ||
| Electric parameter | two wires | three wires | |||
| Output signal | 4~20mA | 0~20mA | 0~10mA | 0~5Vdc | 0~10Vdc |
| Power supply | 10~30Vdc | 12~30 Vdc/ac | |||
| Load | (U-10)/0.02(Ω) | (U-10)/0.02(Ω) | > 20k Ω | ||
| Electric connect | DIN43650, IP65; GX 16-7, IP45; Wire jacket connection, IP68; Waterproof connection; Packard | ||||
| Pressure connect | M20 x 1.5, G1/4, G1/2, NPT1/2, R1/2, NPT1/4 | ||||
Model selections
Send Message
