Model NO.
2W SLP 2V
Working Medium
Air Water Oil Gas
Acting Type
Direct Acting
Orifice
16mm
Joint Size
1/2
Working Pressure
0-0.7MPa
Working Temperature
-5-80ºC
Body Material
Brass
Transport Package
Inner Box, Outer Carton...Pallet
Specification
6kg
Trademark
VPC Pneumatic
Origin
China
HS Code
8481804090
Production Capacity
500000000PCS/Year
Material:
Brass
Certification:
ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
Car Make:
Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
Position:
Front
OEM:
Yes
Type:
Suspension & Steering
| Model | 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W4000-40 2W5000-50 |
| Working medium | air water oil gas |
| acting type | direct acting |
| type | normal close normal open |
| orifice | 16mm 20mm 25mm 35mm 40mm 50mm |
| joint size | G3/8" G1/2"G3/4" G1" G1-1/4" G1-1/2" G2" |
| working pressure | 0~0.7mpa |
| working temperature | Media:-5~80ºC(NBR Seal), -5~120ºC(Viton Seal) Ambient:-5~45ºC |
| body material | brass(plastic, stainless steel also avaiable) |
| seals | NBR VITON |
Standard or Nonstandard:Standard
Structure:Control
Pressure:High Pressure
Power:Solenoid
Material:Alloy
Temperature of Media:High Temperature
Media:Air
Port Size:1/4" 3/8" 1/2"
Place of Origin:China (Mainland)
Model Number:VVU-3L-4F
Brand Name:VPC
Application:Air Suspension, Air Suspension
The New Design Air Suspension Solenoid Valve (Accuair Solenoid Valve Manifolds) is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. It's more smart than our previous manifolds Assembly Valve Block wiring harness 160-4F Solenoid Valve.
Good replacement to Accuair AA-VU4 Air suspension valve block With E-level
| Compatiable Suspension Type | 4-Corner Full Air Suspension |
| Voltage Requirements | 10.5-16 Volts |
| Current Requirements | 1.1 Amps (for each of the (8) Valves) |
| Connectors | IP67 certified (immersion up to 3 ft) |
| Fitting Size | 3/8" D.O.T. / P.T.C (x 8), 1/4" NPT (x 4) |
| No. of Inlet Ports | 2 |
| No. of Exhaust Ports | 2 |
| Max Operating Pressure | 200Psi |
| Cv Flow Factor | 0.33 |
| Average Adjustment Time | 2.2 Seconds (from 10% to 50% of travel) |
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve
Send Message
