Contitech FS 530-14 3/4-14NPTF Rubber 1 Convoluted Air Spring Replacement
Refer No.
CONTITECH FS 530-14
CONTITECH FS 53014
CONTITECH FS 530 14
Continental FS 530-14
Fire-stone Style 113-1
Fire-stone. W01-358-7112
Fire-stone. W01 358 7112
Fire-stone. W013587112
Fire-stone. WO1-358-7112
Fire-stone. WO1 358 7112
Fire-stone. WO13587112
FleetPride AS7112
Goodyear 1B14 358
Goodyear 1B14358
Goodyear 1B14-358
Goodyear Flex No. 578913352
Taurus 6326
Triangle AS-4339
Triangle AS4339
TRP AS71120
Dayton 354-7112
Dayton 354 7112
Dayton 3547112
Hendrickson S-13044
Loadguard SC2012
Fleetrite 554782C1
Ridewell 1003587112C
SAF Holland 90557028
Navistar
Specifications and Detailed Technical Parameters:AIRSUSTECH 1B53014P01
Nut/blind nut
Top plate screw (nut) teeth: 4X3/8-16UNC
The screw center distance of the top cover plate: 158.8mm
Screw (nut) teeth of the bottom cover plate: 4X3/8-16UNC
The screw center distance of the bottom cover plate: 158.8 mm
Air hole/air inlet/air fittings
Air hole/air inlet: 3/4NPTF-14NPTF
The air hole is in the middle of the screw center
Cover plate
Top plate diameter: 289 mm
Diameter of the bottom cover: 289 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 406 mm
Natural diameter of rubber bellows: 360 mm
Working stroke: minimum 81 mm to maximum 160 mm
Maximum height: 160 mm
Minimum height: 81 mm
Bumper block/bumper block
No bumper block
Belt loop/Girdle hoop/Girdle ring
Withot belt loop/girdle hoop/girdle ring
Min. pressure: 0 bar
Return force to min.height: ≤300N
Overall weight with clamped plates: 6.1kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 150mm, minimum 120mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 18.6 | 24.9 | 31.5 | 37.9 | 44.4 | 50.8 | 11.0 |
| Spring rate [N/cm] | 3650 | 4410 | 5340 | 6140 | 7220 | 7920 | |
| Natural frequency [Hz] | 2.2 | 2.1 | 2.1 | 2.0 | 2.0 | 2.0 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 160 | 17.1 | 23.0 | 29.0 | 35.0 | 41.2 | 47.3 | 11.8 |
| 140 | 20.0 | 26.8 | 33.7 | 40.6 | 47.7 | 54.5 | 10.7 | |
| 120 | 22.3 | 29.8 | 37.3 | 44.9 | 52.7 | 60.2 | 9.5 | |
| 100 | 24.1 | 31.9 | 40.0 | 48.1 | 56.3 | 64.3 | 8.2 | |
| 80 | 25.3 | 33.4 | 41.9 | 50.3 | 58.8 | 67.1 | 6.6 | |
| 60 | 26.0 | 34.5 | 43.4 | 52.0 | 60.8 | 69.1 | 4.6 | |
Precautions when installing the air spring
When installing the air spring, try to ensure that the upper seat and the lower seat have the same center line, and minimize the offset and tilt of the center line of the upper seat and the lower seat of the air spring. Excessive offset and tilt will increase the wear of the air spring, and there are The possibility of internal friction can easily lead to early damage to the air spring. When installing the air spring, it should be ensured that there is enough installation space, no friction with any part, and no interference with any part during the entire use period, and necessary measures should be taken to prevent the impact of hard objects.
The related picture of 1B53014P01
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
Send Message
