Model NO.
ZLY112-6.3-I
Type
Cylindrical
Gear
Hardened HRC55-62
Shaft
Parallel Shaft
Input Motor
4p ~ 6p (1500rpm~750rpm)
Color
Grey, Blue, Yellow, Green, Orange
Material
Cast Iron
Manipulate Way
Robotics
Toothed Portion Shape
Bevel Wheel
Changes Way
Stepped
Manufacturing Method
Grinding Gear
Transport Package
Wooden Case/Plywood Case/Pallet
Specification
ISO9001: 2008
Origin
Jiangsu
HS Code
8483409000
Production Capacity
53000 Sets/Month
Application:
Industry
Function:
Change Drive Torque, Speed Reduction
Layout:
Coaxial
Hardness:
Hardened
Installation:
Horizontal Type
Step:
Three-Step
The technical data
Characteristics:
1.The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to HRC58-62. All gear adapts NC tooth grinding process, high in accuracy and good in contact performance;
2.High in transmission efficiency: single stage, more than 96.5%; double-stage, more than 93%; three-stage, more 90%;
3.Smooth and stable in run, low noise;
4.Compact, light, long life, high bearing capacity;
5.Easy to disassemble, inspect and assemble.
Aplication fields:
widely used in various low-speed transmissions, which are general basic parts of mechanical transmission.mainly:
metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing and dyeing, pharmaceutical, etc....
FAQ
Q: What is your MOQ of this item?
A: 1pcs. For the first time cooperation, we accept trial sample order.
Q: What's your payment terms?
A: 30% T/T deposit, 70% balance before shipment or L/C at sight.
Q: What's the delivery time?
A: 30 days after receiving your L/C or T/T deposit.
Q: Can we used our own brand on motors ?
A: Sure, we can offer OEM service, manufacture with your authorized brand.
Q: How long is your warranty?
A: 12 months after receiving B/L.
Factory
Office Block
Team
| Size | 80, 100, 125, 160, 200, 250, 280, 315, 255, 400, 450, 500,560 |
| Ratio | 6.3; 7.1; 8; 9; 10; 11.2; 12.5; 14; 16; 18; 20 |
| The rotation speed of high speed shaft | no more than 1500rpm. |
| The circumferential velocity of gear | no more than 20m/s. |
| Ambient temperature | -40~45ºC. Lubricant should be heated up to 0ºC before starting if the ambient temperature is below 0ºC |
| Direction | clockwise and un-clockwise |
Characteristics:
1.The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to HRC58-62. All gear adapts NC tooth grinding process, high in accuracy and good in contact performance;
2.High in transmission efficiency: single stage, more than 96.5%; double-stage, more than 93%; three-stage, more 90%;
3.Smooth and stable in run, low noise;
4.Compact, light, long life, high bearing capacity;
5.Easy to disassemble, inspect and assemble.
Aplication fields:
widely used in various low-speed transmissions, which are general basic parts of mechanical transmission.mainly:
metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing and dyeing, pharmaceutical, etc....
FAQ
Q: What is your MOQ of this item?
A: 1pcs. For the first time cooperation, we accept trial sample order.
Q: What's your payment terms?
A: 30% T/T deposit, 70% balance before shipment or L/C at sight.
Q: What's the delivery time?
A: 30 days after receiving your L/C or T/T deposit.
Q: Can we used our own brand on motors ?
A: Sure, we can offer OEM service, manufacture with your authorized brand.
Q: How long is your warranty?
A: 12 months after receiving B/L.
Factory
Office Block
Team
Send Message
