Model NO.
Electric suction door GW-BZ-001
Outer Plate Thickness
0.70mm
Door Check Limited Power Providing Method
Rubber Spring Type
Door Check Friction Force Type
Rolling Friction Type
Processing Technique
Integral Type
Fit Car Brand
Banz
Warranty
3 Year
Closing Distance
6mm
Operating Temperature
Minus 20 to 50 Degrees Above Zero
Storage Temperature
Minus 40 to 95 Above Zero
Durability Design
10 Million Times Open and Close Loop
Working Voltage
10-16V
Quiescent Current
<0.1A
Nominal Voltage
12V
Model Year
2018
Transport Package
Kraft-Paper Box
Specification
4 doors per set
Trademark
GRWA
Origin
China, Qingdao City
HS Code
8708920000
Production Capacity
2000pieces/Week
Type:
Electric Suction Door
Outer Plate Type:
Cold Plate
Seal Material:
Rubber Sealing Strip
Open Type:
Horizontal Shifting
Hinge Connecting Method:
Bolt Fastening
Glass Lift Type:
Single-arm
High Quality Auto Parts Electric Suction Door for Banz C
Features:
1) Automatic closing
The closing distance is 8mm, with smart induction and perfect closing
2) Soft-close automatic operation for four doors
Comfortable driving, gracefully getting on/off the car
3) Replacement at original position
Directly replacing the door lock of the original car, 100% nondestructive installation
4)New generation electronic child lock
It can be directly controlled in the driver's seat instead of the rear seat
5) Safe door closing
Smartly identifying the action of door closing, completely locking by lightly pushing the door
6) Opening and closing under any condition
The doors can be opened and closed under emergency such as power failure
7)Logic anti-pinch
When the door is closing, the door will immediately stop closing when it contacts the finger, thus preventing pinch
8)Super silence
The noise is lower than 40db, you will not listen any noise
GRWA Soft closing automatic door for Mercedes-Benz C-class/ E-class
Principle
1)High quality raw materials
It is designed in divided structure with simple and convenient installation, avoiding complicated wiring. The metal part is made of high strength chrome steel and the plastic part is made of high strength compound material. Application of standard wire harness and terminals, standard waterproof switch.
2)Transmission gear
The transmission gear is made of powder metallurgy and aviation material PM5.1. It is firm and wear-resistant, it will not break, and it has low working noise
3)Locking hook technology
The main function of the locking hook is to be able to close the door accurately and seamlessly and keep the door securely locked.
As a key component matching the lock body, the lock hook guarantees the central component of the entire lock system without malfunction. Therefore, higher standards are implemented when producing hooks. A lot of R&D and testing work was carried out. The lock is characterized by a strong tensile strength that meets special criteria and reduces operating noise even more.
4)Product advantages
According to the data design of the original vehicle lock, the method of directly replacing the original vehicle lock is adopted to realize the non-destructive installation, special docking and linking, and the installation position is matched with the original vehicle.
5)Electric suction door module
lock block module - lock body, drive device - gear motor box, self-suction control system - drive control circuit, door position detection system - inhaul cable, Hall dual standby detection system,the original car drive cable Parts, original car special harness.
6)Electric suction lock principle
By using the motor drive to pull the car door lock bolt, it solves the problem that can't be closed, so as to achieve the effect that the user only needs
to gently close the door to lock the door.
Principle
1)High quality raw materials
It is designed in divided structure with simple and convenient installation, avoiding complicated wiring. The metal part is made of high strength chrome steel and the plastic part is made of high strength compound material. Application of standard wire harness and terminals, standard waterproof switch.
2)Transmission gear
The transmission gear is made of powder metallurgy and aviation material PM5.1. It is firm and wear-resistant, it will not break, and it has low working noise
3)Locking hook technology
The main function of the locking hook is to be able to close the door accurately and seamlessly and keep the door securely locked.
As a key component matching the lock body, the lock hook guarantees the central component of the entire lock system without malfunction. Therefore, higher standards are implemented when producing hooks. A lot of R&D and testing work was carried out. The lock is characterized by a strong tensile strength that meets special criteria and reduces operating noise even more.
4)Product advantages
According to the data design of the original vehicle lock, the method of directly replacing the original vehicle lock is adopted to realize the non-destructive installation, special docking and linking, and the installation position is matched with the original vehicle.
5)Electric suction door module
lock block module - lock body, drive device - gear motor box, self-suction control system - drive control circuit, door position detection system - inhaul cable, Hall dual standby detection system,the original car drive cable Parts, original car special harness.
6)Electric suction lock principle
By using the motor drive to pull the car door lock bolt, it solves the problem that can't be closed, so as to achieve the effect that the user only needs
to gently close the door to lock the door.
| High Quality Auto Parts Electric Suction Door for Banz C | |||||
| Type: | Car Auto Parts | Car Model: | for Mercedes-Benz C-class/ E-class | OE NO: | Standard Size |
| Warranty: | 3 years | Place of Orign : | China (Minland ) | Brand Name: | GRWA |
| Certification: | SGS,DUNS | Applicatio: | auto door adsorption | Material: | Metal and Plastic |
| Product Name: | Electric suction door | Installation: | Plug and play | Advantage: | Automatic closing |
| Function: | Anti-pinch | Key words: | Electric suction door | Waterproof: | IPX |
Features:
1) Automatic closing
The closing distance is 8mm, with smart induction and perfect closing
2) Soft-close automatic operation for four doors
Comfortable driving, gracefully getting on/off the car
3) Replacement at original position
Directly replacing the door lock of the original car, 100% nondestructive installation
4)New generation electronic child lock
It can be directly controlled in the driver's seat instead of the rear seat
5) Safe door closing
Smartly identifying the action of door closing, completely locking by lightly pushing the door
6) Opening and closing under any condition
The doors can be opened and closed under emergency such as power failure
7)Logic anti-pinch
When the door is closing, the door will immediately stop closing when it contacts the finger, thus preventing pinch
8)Super silence
The noise is lower than 40db, you will not listen any noise
GRWA Soft closing automatic door for Mercedes-Benz C-class/ E-class
| GRWA-015 | Mercedes-Benz | Mercedes-Benz C-class | 2014 year and after 2014 year(W205) |
| Mercedes-Benz E-class | 2016 year and after 2016 year(W213) | ||
| GLA | 2013 year and after 2013 year(X156) | ||
| GLC | 2015 year and after 2015 year(X253) | ||
| Mercedes-benz a-class import | |||
| Mercedes-benz b-class import | |||
| Mercedes-benz gla-class import | |||
| Mercedes-benz gls-class import | |||
| Mercedes-benz gle-class import | |||
| GRWA- 016(1) | Mercedes-Benz | Mercedes-Benz C-class(long) | 2015+year |
| GRWA- 016(2) | Mercedes-Benz C-class(short ) | ||
| GRWA- 016(3) | Mercedes-Benz E-class(long) | 17+year | |
| GRWA- 016(4) | Mercedes-Benz E-class(short) | ||
| GRWA- 016(5) | GLA | 2014+year | |
| GRWA- 016(6) | GLC | 2015+year | |
| GRWA- 016(7) | GLC coupe | 2017+year | |
| GRWA- 016(8) | GL | 2013-2015year | |
| GRWA- 016(9) | ML | ||
| GRWA- 016(10) | GLE | 2014+year | |
| GRWA- 016(11) | GLE coupe | 2017+year | |
| GRWA- 016(12) | GLS | 2014+year |
GRWA Car Part Electric Suction Doors For AUDI
Our Service
1)Strict quality control during the process
2)Competitive price
3)OEM is acceptable
4)Professional designed
5)High performance full exhaust system customers design and logo are welcome
6)Three years warranty
7)Delivery on time and best after-sales service
Principle
1)High quality raw materials
It is designed in divided structure with simple and convenient installation, avoiding complicated wiring. The metal part is made of high strength chrome steel and the plastic part is made of high strength compound material. Application of standard wire harness and terminals, standard waterproof switch.
2)Transmission gear
The transmission gear is made of powder metallurgy and aviation material PM5.1. It is firm and wear-resistant, it will not break, and it has low working noise
3)Locking hook technology
The main function of the locking hook is to be able to close the door accurately and seamlessly and keep the door securely locked.
As a key component matching the lock body, the lock hook guarantees the central component of the entire lock system without malfunction. Therefore, higher standards are implemented when producing hooks. A lot of R&D and testing work was carried out. The lock is characterized by a strong tensile strength that meets special criteria and reduces operating noise even more.
4)Product advantages
According to the data design of the original vehicle lock, the method of directly replacing the original vehicle lock is adopted to realize the non-destructive installation, special docking and linking, and the installation position is matched with the original vehicle.
5)Electric suction door module
lock block module - lock body, drive device - gear motor box, self-suction control system - drive control circuit, door position detection system - inhaul cable, Hall dual standby detection system,the original car drive cable Parts, original car special harness.
6)Electric suction lock principle
By using the motor drive to pull the car door lock bolt, it solves the problem that can't be closed, so as to achieve the effect that the user only needs
to gently close the door to lock the door.
Principle
1)High quality raw materials
It is designed in divided structure with simple and convenient installation, avoiding complicated wiring. The metal part is made of high strength chrome steel and the plastic part is made of high strength compound material. Application of standard wire harness and terminals, standard waterproof switch.
2)Transmission gear
The transmission gear is made of powder metallurgy and aviation material PM5.1. It is firm and wear-resistant, it will not break, and it has low working noise
3)Locking hook technology
The main function of the locking hook is to be able to close the door accurately and seamlessly and keep the door securely locked.
As a key component matching the lock body, the lock hook guarantees the central component of the entire lock system without malfunction. Therefore, higher standards are implemented when producing hooks. A lot of R&D and testing work was carried out. The lock is characterized by a strong tensile strength that meets special criteria and reduces operating noise even more.
4)Product advantages
According to the data design of the original vehicle lock, the method of directly replacing the original vehicle lock is adopted to realize the non-destructive installation, special docking and linking, and the installation position is matched with the original vehicle.
5)Electric suction door module
lock block module - lock body, drive device - gear motor box, self-suction control system - drive control circuit, door position detection system - inhaul cable, Hall dual standby detection system,the original car drive cable Parts, original car special harness.
6)Electric suction lock principle
By using the motor drive to pull the car door lock bolt, it solves the problem that can't be closed, so as to achieve the effect that the user only needs
to gently close the door to lock the door.
Send Message
